Symbols - Fluke 1760 Getting Started Manual

1760
Getting Started Manual

Symbols

Table 1 shows the symbols used on the instrument and/or
in this manual.
Table 1. Symbols
Symbol
X
Hazardous voltage. Risk of electric shock.
W
Important information. See manual.
Do not apply around or remove from
-
HAZARDOUS LIVE conductors.
J
Earth ground.
T
Double insulation.
B
AC (Alternating Current)
F
DC (Direct Current).
Conforms to requirements of European
P
Union.
Canadian Standards Association is the
)
certified body used for testing compliance
to safety standards.
2
Description
Do not dispose of this product as unsorted
~
municipal waste. Go to Fluke's website for
recycling information.
Conforms to relevant Australian
;
Standards.
CAT II IEC Overvoltage Category/Measurement
Category II equipment is designed to be
protected against transients from socket
outlets and similar points.
CAT III IEC Overvoltage Category III equipment is
designed to protect against transients in
installations, such as distribution panels,
feeders and short branch circuits, and
lighting systems in large buildings.
CAT IV IEC Overvoltage Category IV equipment is
designed to protect against transients from
the primary supply level, such as an
electricity meter or an overhead or
underground utility service.