Invacare ORBIT Owner's Operator And Maintenance Manual page 6

PROCEDURE 1
7. Pull down on quick-release pin to ensure positive lock.
8. Install the footrests. Refer to FRONT RIGGINGS in
D
I
PROCEDURE 2 of this manual.
S
9. Install joystick onto mounting bracket. Refer to RE-
A
S
MOVING/INSTALLING JOYSTICK in PROCE-
S
DURE 3 of this manual.
E
M
10. If necessary, perform the following:
B
A. Unfold the back canes. Refer to FOLDING/UN-
L
Y
FOLDING THE BACK CANES in PROCEDURE
4 of this manual.
A
S
S
E
Locking Buttons
M
Engage Here
B
L
Y
Seat Frame
Plate
SEAT FRAME
SECTIONAL OF SEAT FRAME AND BASE FRAME
ASSEMBLED (WITHOUT SEATING SYSTEM)
Seat Frame
Plate
Locking
Channels
FIGURE 1 - DISASSEMBLING/ASSEMBLING THE SEAT FRAME FROM/TO THE BASE FRAME
NOTE: If a seating system is being used on the wheel-
chair, refer to the seating system Owner's Manual for in-
stallation and removal of the seating system.
Locking Buttons
Engaged
Crossmember
Quick-Release
6
DISASSEMBLY/ASSEMBLY
B. Install the T-arms. Refer to REMOVING/IN-
STALLING THE T-ARMS in PROCEDURE 3 of
this manual.
C. Install the existing seating system onto the wheel-
chair, if so equipped.
D. Install the batteries. Refer to REMOVING BAT-
TERIES on page 43 in the Power Tiger Owner’s
Manual, part number 1045938.
SEAT FRAME AND BASE FRAME DISASSEMBLED
Locking
Channel
Locking Buttons
Base Frame
BASE FRAME
DETAIL "A" - SIDE VIEW
Locking
Pins
Quick-Release
Pin
Seat Frame
Base Frame Plate
Pin
Tip
Plate
Top of
Seat Frame
Plate
Base Frame
Plate
Plate
Crossmember
Locking
Button
Plunger