Advanced Scheduled Recording; To Cancel A Scheduled Recording In Progress; Check, Change, Or Delete Programs; To Release The Unit From Recording Standby (Before Recording Starts) - Panasonic DMR-EA38V Operating Instructions Manual

Advanced Scheduled Recording

To cancel a scheduled recording in
progress
DRIVE
SELECT
STOP
– Confi rmation screen appears.
 to select "Stop recording",
then
Notes
Recording stops and 'one-time' programs are deleted from the
Schedule List. Programs scheduled to record 'Daily' and 'Weekly'
remain on the Schedule List and are set to begin at the next
scheduled time.

Check, Change, or Delete Programs

The scheduled recording list can be viewed even when
the unit is in "recording standby" mode.
– See "Tips" (
displayed.
,  to select the program.
OK
, , ,  to make changes,
then
DELETE
or
SUB MENU
– You cannot delete programs that are currently
recording.
DVD/VHS
POWER
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
to select the drive.
OK
right) for explanation of icons
to modify the program.
OK
CANCEL
or
RESET
, then to delete.
OK
– "" lights on the unit's display.
Notes
If the program schedule is changed by the TV station, then this
unit will not be able to detect the change.
Tips
You can enter up to 16 programs a month in advance.
Schedule List Remaining Recording Time VHS 2:00 SP
5/ 4 Fri
No Channel Date On Off Drive Mode
New Scheduled Recording
 Schedule List screen icons
:
Currently recording
: Programs are overlapped. Recording of the program with
the later start time starts when the earlier program fi nishes
recording.
: You stopped a weekly or daily scheduled recording. The
icon disappears when the next scheduled recording starts.
: The disc was full. (not enough space)
: The TV program may not be recorded due to copy-protect.
(disc)
: Recording stopped (Dirty disc, etc.)
Check
OK: Recordable (disc)
(Date): The last day of daily or weekly recording. (disc)
!: It may not be possible to record because:
– the disc is write-protected.
– there is no more space left (disc).
– the number of possible recordings has reached its
maximum (disc).
Overlap: When the date and time overlap with another scheduled
recording, only a part of the program can be recorded
(disc).
--: When the drive is set to VHS, "--" is displayed.
To release the unit from recording
standby
(Before recording starts)
DVD/VHS
POWER
– The unit turns on and "" on the unit's
display goes out.
Be sure to press [ DVD/VHS POWER] to return the unit to standby
mode before the scheduled recording time. Scheduled recording will
work only if "" is displayed.
DVD 0:33 XP
6:11 PM
Check
25