IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all the instructions before use. 2. Do not touch hot surfaces; use handles or knobs. 3. To avoid electric shock, do not immerse the power cord, or any part of the unit, in any liquid. 4.
The SODIR models CT-540 and CT-3000 Conveyer Toaster/Ovens are designed to offer quality food warming and toasting. They are constructed of food service quality stainless steel for commercial applications. The CT-540 can be used in pass-though configuration, or front-loading and unloading. It has a 12” wide by 1-3/4 inch throat opening.
Turn toaster power switch to desired power configuration and adjust knob for desired belt speed. The CT-540 features an angled loading shelf that will feed product into the toaster as the belt advances. When loading the CT-3000, first adjust the throat height before preheating by sliding the movable panels to the left, raising or lowering to the desired height, and then sliding the panel back to towards the right to lock into place.
The crumb trays, rear rack, front shelf and diverter door (CT-540) and belt cover (CT-3000) are separately removable, and can be cleaned using a damp cloth or sponge and mild liquid soap, or placed in a dishwasher.
Page 7
Spare Parts CT-540 DWG# Part Number Description 57031 Top hot casing 57008SE Removable reflector B07020 Chain B01004 Gear wheel F01046 Grid A03038 Motor Cord with plug D01044 Top heating element D01045 Bottom heating element D04015 Quartz tube A10002 Cord closer...
This warranty applies only to equipment under normal use and service in the U.S.A. and Canada. It does not apply to any item which has been repaired or altered in any way so as, in the judgment of EQUIPEX, to affect its reliability.
Need help?
Do you have a question about the CT-540 and is the answer not in the manual?
Questions and answers