Aduance dl5500 User Manual page 8

USB 3.0 4K Ultra HD Display Adapter
Select installation from CD, the Setup.exe file in the CD:/Driver directory or confirm automatic
installation of the downloaded driver. You can find the current drivers for i-tec products on our website
http://www.i-tec-europe.eu in the "Download" tab for the individual products.
Note for installation of the Video (Display) port: The installation will follow in several steps. For OS Win 7
/ 8 / 8.1 / 10 perform the installation as the Administrator and after the installation restart the PC /
notebook.
During the installation of the drivers the screen may glimmer – this is a standard process.
Ÿ
After the installation of the drivers, we recommend restarting the PC / notebook.
Ÿ
The system then shows "USB3.0 UHD HDMI Adapter" in USB Display Adapters and "DisplayLink
Ÿ
Audio" in Audio Devices.
HARDWARE INSTALLATION (CONNECTING THE ADAPTER TO A PC / NOTEBOOK)
1. Turn on the PC / notebook and connect the USB cable to the Micro USB 3.0 port.
2. Connect the USB 3.0 cable to the PC / notebook to a free USB 3.0 / 2.0 port.
3. After this, the automatic installation of the drivers in the individual systems will start.
4. Restart the PC / notebook.
5. Connect the HDMI cable to the USB 3.0 4K Ultra HD Display Adapter and to the monitor. After
connecting, the screen may glimmer – this is a standard process.
INSTALLATION OF DRIVERS IN MAC OS X
Before the first use do not connect the USB 3.0 4K Ultra HD Display Adapter to the MacBook / PC, until
you install the corresponding drivers from the supplied CD. The equipment drivers need to be installed
only before the first use.
Insert the CD with the drivers to the CD drive or download the required software from our website www.i-
tec-europe.eu from the „Download" tab for this product. Install the drivers according to the following
procedure:
Select the installation from the DisplayLink_MacOSX.dmg file in the directory on the CD:/ or run the
downloaded file. Decompress the file on the desktop of your MacBook / PC as a virtual disc, select
"Drivers" and then „DisplayLink Software Installer". Then select the language of the installation and
follow the instructions on the screen. Enter the user password if necessary.
The monitor may be flashing during the installation of the drivers – this is a standard process. After the
completion of the installation restart the MacBook / PC.
HARDWARE INSTALLATION (CONNECTING THE ADAPTER TO A MACBOOK / PC)
1. Turn on the MacBook / PC and connect the USB cable to the Micro USB 3.0 port.
2. Connect the USB 3.0 cable to the MacBook / PC to a free USB 3.0 / 2.0 port.
3. After this, the automatic installation of the drivers in the individual systems will start.
4. Restart the MacBook / PC.
5. Connect the HDMI cable to the USB 3.0 4K Ultra HD Display Adapter and to the monitor. After
connecting, the screen may glimmer – this is a standard process.
The installed ports are displayed in Mac OS X as „USB3.0 UHD HDMI Adapter" in „About This Mac" →
„System Profiler" → „Hardware" → „USB".
UNINSTALLING THE DRIVERS
Use the default uninstall via Control Panel-Add or Remove Programs-Remove:
DisplayLink Core Software for Video drivers
Ÿ
SAFETY INSTRUCTIONS
Do not expose to the extreme temperatures and air moisture.
Ÿ
Use the device on the flat pads – you avoid the slip and fall on the ground.
Ÿ
Keep the activators and manual for the later possible use.
Ÿ
EN
07