dbx DriveRack PX Manual page 7

14.
With the RTA mic connected, place the RTA
mic on a mic stand and aim it between the
left and right main speakers approximately
25' away.
15.
Turn the Data Wheel until pink noise is playing through your speakers at performance level (the same
volume you intend to use during your performance). The words "SET TO PERFORMANCE LEVEL" will ap-
pear in the display when you have passed the minimum threshold. Set level higher as needed.
When performance level is reached, press the NEXT PG button. The DriveRack PX will now adjust the
balance between left/right levels for your main speakers (and your subs, if you have them). Note that
you may be prompted to readjust your speaker knob settings if needed.
16.
When the display reads "Auto Level Complete," release the RTA INPUT button.
Press the RTA INPUT button to release.
A. Turn the Data Wheel to adjust pink noise level.
0 dB to 6 dB typical.
B. Press the NEXT PG button
when your performance
level is reached.
PREV PG NEXT PG
SETUP
SUBHARMONIC COMP/LIMITER EQ
STORE AFS
PRESET
UTILITY
RECALL UTILITY WIZARD WIZARD
PREV PG
NEXT PG SETUP
SUBHARMONIC COMP/LIMITER EQ
STORE
PRESET AFS
RECALL UTILITY UTILITY WIZARD WIZARD
7