Bose Panaray 802 Series IV Installation Manual page 12

Installation
Attach the bracket to the wall. Follow the instructions provided with the wall bracket.
2.
Choose a position and mounting method consistent with local building codes and regulations. Ensure the mounting
surface and the method of attaching the loudspeaker to the surface is structurally capable of supporting the weight of the
loudspeaker (7.3 kg (16 lb)). A 10:1 safety weight ratio is recommended.
Using the included T3 square drive, remove the plastic inserts on the rear panel of the loudspeaker and attach the
3.
bracket to loudspeaker using only the included M8 x 20 mm screws.
Hang the loudspeaker on the wall-mounted half of the bracket and install the lower carriage bolt removed earlier.
4.
12
M8 x 20 mm
13.6 – 16.3 Nm (10 – 12 ft-lb)
pro.Bose.com