Installation
Place the loudspeaker on the bracket.
5.
Tilt the loudspeaker to the desired angle and insert the second M8 cap screw on each side of the loudspeaker.
6.
Using a 5 mm Allen wrench, tighten all four cap screws to 5.6 Newton-meters (50 inch-pounds).
7.
Connect field wiring and test loudspeaker operation.
8.
SB-8 suspension bracket (for indoor use only)
The SB-8 suspension bracket kit is used for suspension-mounting one 802 loudspeaker. The kit provides 0-45 deg pitch.
10
Wall mount pitch angles
5.6 Nm (50 in-lb)
pro.Bose.com
Ceiling mount pitch angles