Section 6: Items Required For Assembly; Section 7: Unpacking; Contents Of Crate; Contents Of Hardware Pack - Yard Machines 550 Operator's Manual

Table of Contents

Advertisement

SECTION 6: ITEMS REQUIRED FOR ASSEMBLY

QTY
DESCRIPTION
(1)
Crowbar or Large Screwdriver
(1)
Soft Hammer or Mallet
(2)
9/16" Wrenches*
(2)
1/2" Wrenches*
(1)
7/16" Wrench*
(1)
13/16" Wrench*
(1)
7/8" Wrench*
(1)
Adjustable Wrench
(1)
Screwdriver
(1)
Pliers
(1)
Knife
(1)
Cutters

SECTION 7: UNPACKING

WARNING:
as parts are very heavy. Mechanical
handling equipment should be used, or
sufficient people to prevent injury.
1. Pry the top, sides and ends off crate using a
crowbar or large screwdriver.
2. Set panels aside to avoid tire punctures or
personal injury.
3. Remove and discard plastic bag that covers unit.
4. Remove wheels and small box from crate.
5. Cut and remove straps which secure parts to
bottom of crate. Unbolt parts which are bolted to
the bottom of the crate.
Exercise extreme caution
• Engine Oil
• Unleaded Gasoline
• Dexron III Automatic Transmission Fluid or
10W Non-Foaming Hydraulic Fluid
*Adjustable Wrenches may be used.

CONTENTS OF CRATE

• Reservoir Tank and Engine -Pump Assembly
• Wedge, Beam and Cylinder Assembly
• Tongue Assembly
• Wheels
• Hitch Assembly
• Beam Support/Latch Bracket
• Fenders

CONTENTS OF HARDWARE PACK

• 2 hub caps
• Log Splitter Operators Manual
• 4 bolts
• 4 lock washers
• 4 nuts
• Engine Owners Guide
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

560

Table of Contents