Use Notes And Important Safety Items; Product Overview; Product Introduction; Prepration Before Use - GP3D Root User Manual

U
SE NOTES AND IMPORTANT SAFETY ITEMS
 During printing do not touch the power line, USB data line, or pull out
the SD card. Otherwise the printing process will be interrupted.
 To avoid nozzle clogging, do not heat long time when it is not in
extruding condition.
 When debugging, the nozzle will extrude filament, so please ensure
there is at least 50mm between nozzle and print platform, otherwise
the nozzle might clog.
Do not handle into the machine during heating or using. Otherwise

collision or scalding due to mobile printing.
Do not place the printer in high humidity, dust, or sunlight.

Do not place the printer on an inclined surface. Printing will be

affected and the machine may be damaged or hurt other items.
To avoid burns or scratches, do not separate printed objects without

protective gloves.
1. P
RODUCT OVERVIEW

PRODUCT INTRODUCTION

1.1
（Figure 1.1-01）
1. Nozzle 2. Z-axis
5. Y-axis 6. Teflon tube filament guide
3. Building plate 4. Clips
7. Extruder head
8. Filament tube guide 9. X-axis
11. Filament 12. Touch screen
14. Power input 15. Power Switch

technical parameters

1.2
 running environment
Use temperature：5℃～35℃
Relative humidity：30%～90%
 Electrical Parameters
Power Input: 100 - 240V
Output: 12V/DC 5.3A
Maximum Power: 63.6W
 Print parameter
Printing Size: 150×150×140mm
Layer Thickness: 0.2～0.3mm
Speed: 30－150 cm³/h
 Material parameters
Material diameter：1.75mm
Material: PLA
Printing Temperature: PLA 220-230°C
 Software parameters
Print software：
Germinate_v1_0
File format：
STL/GCODE/X3G
Adaptive system：
Windows XP/Vista/Win7/8/8.1
 Structural parameters
Printer Size: 298×221×403mm
Packing size：19.53"(L)×14.80"(W)×14.02"(H)
Net Weight: 16.5 Lbs
Gross Weight：26.45 Lbs
P
REPARATION BEFORE USE
2.
2.1
CHECK THE BOX AND PRINTER
Please check that the product is in good condition, such as no surface
scratches or damage. Please contact the local dealer or GP3D
customer service. If anything is missing from the box please contact GP3D
customer service.
parts installation
2.2
2.2.1 Open the tool kit, to find the following items, as shown below.
GP3D Root User Manual
10. Spool holder
13. USB slot
16. SD card slot
47/63Hz 1.6A
1