Table of Contents
Advertisement
EPS-16 PLUS Musician's Manual
• Press Enter•Yes. The display reads SAVING <filename>, then DISK
COMMAND COMPLETED.
• Pressing Cancel•No aborts the command.
LOADING System Exclusive Data from Disk to an External Device
• Connect the MIDI Out of the EPS-16 PLUS to the MIDI In of the receiving
device.
• Press Load, then MIDI. Scroll until the desired Sys-Ex file is selected. The
display looks something like this:
• Press Enter•Yes. The display reads LOADING <filename>.
• The display then reads CANCEL=QUIT ENTER=SEND.
• Press Enter•Yes to send the Sys-Ex file to a receiving device, or
• Press Cancel•No to abort the command.
After you have sent your MIDI Sys-Ex file to a receiving device, the
CANCEL=QUIT ENTER=SEND screen returns. You can retransmit the data by
pressing Enter•Yes, in case it was not properly received for some reason.
• Once the data has been successfully received by the external device, you can, if
you wish, make a back-up copy of the file onto a different disk.
• Press Cancel•No. The EPS-16 PLUS asks RESAVE FILE TO DISK?
• Press Enter•Yes to save the Sys-Ex file to disk, or Cancel•No if you don't
wish to make a backup.
This command is used to label EPS-16 PLUS disks with a seven character Disk
I.D. These labels are used to give each of your EPS-16 PLUS disks a unique
identity, thereby allowing banks to load from multiple disks (see Section 3 —
Instruments and Banks for more details).
To label an EPS-16 PLUS disk:
• Select WRITE DISK LABEL.
• Press Enter•Yes.
The display will read USE CURRENT LABEL? Pressing the Enter•Yes
allows you to use the disk label from the last disk read by the drive. This can
speed up the labelling process, as it is likely you'll want to keep the same first
four alpha-numeric characters, changing only the three-digit number at the end
of the label. If not, pressing Cancel•No defaults to DISK000.
• Use the data entry controls to name the disk.
• Press Enter•Yes. The display briefly reads DISK COMMAND
COMPLETED, then returns to the COMMAND/System•MIDI page.
COMMAND/System•MIDI Page
Section 2 — System Control
2 - 17
Advertisement
Table of Contents
