Advertisement
Display
Upper row with
switching pattern
for DHW control
Lower row with
switching pattern
for heating
OFF mode and frost
protection display
Backup
Building Technologies
HVAC Products
The following DHW operating modes can be selected:
Continuously ON:
Continuously OFF:
Auto:
Factory setting: Time switch for DHW
Day(s)
DHW control ON
Mo (1) – Fr (5)
6:00 – 8:00 h and
17:00 – 22:00 h
Sa (6) – Su (7)
7:00 – 22:00 h
The digital display shows the actual room temperature, the time of day, the weekday,
the current switching pattern for heating, the switching pattern for DHW, and the symbol
of the operating mode currently active. When the heating output is activated, the trian-
gle symbol appears.
Display of the switching pattern is split up in upper and lower row.
When the segment is displayed and flashing, the DHW output is activated. When no
segment is displayed, the DHW output is deactivated.
C
0
6
12
18
24
DHW Auto mode
When the segment is displayed and flashing, the normal temperature setpoint is active.
When no segment is displayed, the energy saving or frost protection temperature set-
point is active.
C
0
6
12
18
24
Automatic changeover
according to switching pattern
C
0
6
12
18
24
OFF mode
When taking out the batteries, the setpoints and the information required for operating
mode changeover are memorized. However, the real time clock must be reset after the
batteries are replaced.
Room temperature controller RDE10.1DHW
Symbol
appears on the display
No symbol on the display
Symbol
appears on the display, DHW is switched
according to the selected switching pattern
C
0
6
12
DHW ON mode
C
0
6
12
Normal operation
C
0
6
12
Frost protection mode
DHW control OFF
22:00 – 6:00 h and
08:00 – 17:00 h
22:00 – 7:00 h
18
24
0
6
DHW OFF mode
18
24
0
6
Energy saving mode
18
24
C
12
18
24
C
12
18
24
3/8
CE1N3038en
20.10.2005
Advertisement
