10 Options
SCOTTY systems feature a rich set of configurable hardware and software
options, making it possible to tailor the system to customer needs. This
chapter is intended to give a non-exhaustive overview of the possibilities of
the SCOTTY ProMin HD hardware and software. Please note that some of the
optional features may become standard by a future software update.
Different CPU for PC System: e.g. low-power Intel® Atom™ E3827
Up to 16GB RAM (depending on CPU module)
Up do 1TB Flash Disk (or even larger, depending on availability)
Individual pre-installation of PC system, individual software and/or
Wake On LAN / Wake On USB
Power outputs (12V, USB) active even when system is in standby
VGA PC display video output (depending on CPU module)
Extended input voltage range: 10V – 33V
Individual video source configuration (RX or TX) of the video outputs of
Individual configuration of the audio inputs: Phantom power voltage,
Different configurations of the serial interfaces: up to four RS232
Embedded audio on SDI input, DVI/HDMI input and DVI/HDMI output
Additional configurations for the analog video inputs: 2 x S-Video, RGB,
Additional configuration for the HD analog video output: RGB
Hardware write-protected disk as required by certain security relevant
Video conference, recording, streaming and/or overlay: up to 60 fps
All rights reserved.
2x1.75GHz CPU
software settings
the Codec
impedances, pre-amplifier and sensitivity.
without handshake lines, or two RS422/RS485, or two RS232 with
handshake lines, or combinations
composite
applications
progressive
SCOTTY ProMin HD Equipment Manual
39