SCOTTY ProMin HD Equipment Manual
5.2 Fan Dust Filter Replacement
The system employs internal fans for air circulation. By removing the fan
cover the air inlet dust filter can be changed even during operation. No tools
are required.
Life cycle time of the filter pad may vary depending on the operating
environment. A replacement of the fan filter pad not later than 24 month is
recommended.
A proper filter pad can be ordered at SCOTTY:
Filter pad: P200 10mm, 36x130mm, part number: SD208306A1
5.3 Storage Disk Replacement
A solid state disk is used for the operating system, the applications and user
data. No maintenance is required, but if necessary the disk can be removed by
pulling out the disk holder. Only use SCOTTY approved disks as replacement.
14
SCOTTY ProMin disk holder
All rights reserved.