Audio Technica AT-MX351 Installation And Operation Manual page 3

Audio-technica smartmixer automatic mixer installation and operation at-mx351
Table of Contents

Advertisement

Safety Cautions
Prior to use of this product, review all safety markings and instructions.
To prevent electric shock, do not remove the cover. There are no user-serviceable parts inside.
Refer all servicing to qualified service personnel.
Warning: This apparatus must be grounded.
This product is a safety class 1 product. There must be an uninterruptible safety earth ground
from the main power source to the product's AC input. Whenever it is likely that the protection
has been impaired, disconnect the power cord until the ground has been restored.
Caution:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Note: Line Voltage Selector Switch
You will find the line voltage selector switch on the bottom panel. Before your model is shipped
from the factory, the switch is set to the power requirements of the destination. Nevertheless,
you should check that it is set properly before plugging the power cord into the wall outlet. If
the voltage requirements differ, adjust the selector switch as follows. Before adjusting, discon-
nect the power cord.
1. Provide yourself with a medium size screwdriver.
2. Change the position of switch to the proper voltage for your area.
Caution:
For continued protection against fire hazard, replace only with same type/rating of fuse.
Warning:
There are some sharp edges inside. To reduce the risk of injury, do not remove cover.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartmixer at-mx351

Table of Contents

Save PDF