The Other Sections; The Sequencer - Arturia modular v User Manual

3.6

The other sections

3.6.1

The sequencer

This module conforms to the original model while simplifying the programming
with internal connections.
It is with this module that you can create melodic sequences or sequences
applied to a parameter (a sequence line applied to the opening of the
frequency can, for example, be very efficient).
The sequencer has 3 sections:
Low frequency oscillator controls the timing of passage from one sequence to
another. Its speed can be set statically with the "frequency" button and
dynamically with the modulation input on the first page. Two buttons, "on" and
"off" respectively start and stop this generator.
Eight-step sequence manager. Each step defines 3 levels of output
modulations, using 3 knobs. The manager moves from one step to another on
each pulse from the low frequency generator. The 3 rows of sequence can
also be chained to create a longer sequence (up to 24 steps)
The output controller allows the management of the 4 modulation outputs for
the current step. The first 3 outputs take their values from the rotating buttons
of the current step (on the corresponding line), eventually with a configurable
smoothing through the "smooth" buttons. The fourth output, for which the
smoothing can also be set through the "smooth" button, is managed in the
following manner. It takes the value from one of the 3 outputs in function with
the current step and the type of progression specified with the "Chain"
selector: This allows the linking sequences to create variations. For example to
link lines 1, 2 and 3 to obtain a 24 step on the same controller.
ARTURIA – Modular V – USER MANUAL 42