1
2
1 Filter casing
2 Suction turbine
Place the new suction turbine on the adapter plate and align it
as per the drawing (dotted line).
Screw on the ground cable.
Install the turbine casing in the reverse sequence.
Connect the connection plug of the turbine.
5.14 Replace the electrodes
4
3
1 Left electrode
2 Electrode cable, left
3 Electrode cable, right
4 Right electrode
Disconnect the connecting cables from the circuit board and
the electrodes.
Replace damaged connecting cables.
Replace the electrodes.
Install new connecting cables in reverse sequence.
10
English 5.906-498.0 Rev. 00 (09/09)
1
2