Conformity Certificates; Usa Requirements - Husqvarna Z 248F Operator's Manual

Labels are placed on the engine and/or in the engine compartment stating that the machine
will fulfill the requirements. This is also applicable to special requirements for any of the states,
(California emission rules etc.). Do not remove these labels. Certificates can also be supplied
with the machine at delivery or written in the Engine manual. Take care of them as they are
valuable documents.
WARNING! Failure to follow cautious
operating practices can result in dangerous
injury to the operator or other persons. The
owner must understand these instructions,
and must let only approved persons who
understand these instructions to operate the
mower.
Each person operating the mower must be of
sound mind and body and must not be under
the influence of mind altering substances.
WARNING! Engine exhaust, some of its
constituents, and certain vehicle components
contain or emit chemicals known to the State of
California to cause cancer and birth defects or
other reproductive harm.
WARNING! Battery posts, terminals
and related accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm. Clean your hands
after handling.

CONFORMITY CERTIFICATES

USA requirements

©2015 All rights reserved.
Orangeburg, SC Printed in U.S.A.
WARNING! Engine exhaust and certain
vehicle components contain or emit chemicals
considered to cause cancer, birth defects,
or other reproductive system damage. The
engine exhaust contains carbon monoxide,
which is an odorless, colorless, poisonous gas.
Do not use the machine in enclosed spaces.
When this product is worn out and no longer
used, return it to the reseller or other party for
recycling.
To implement improvements, specifications
and designs can be altered without prior
notification.
Note that no legal demands can be placed
based on the information contained in these
instructions.
Use only original parts for repairs. The use of
other parts voids the warranty.
Do not modify or install non-standard
equipment to the unit without consent from the
manufacturer. Modifications to the unit may
cause unsafe operations or damage the unit.