Husqvarna 345FR Operator's Manual page 30

Lubrication of wire
(545FXT)
NOTE!
The wire is pre-lubricated and does not need to be
lubricated again until required.
• Remove the protective cover.
• Unscrew the cylinder cover and make sure the rubber
bellows on the wire has not been expanded too much.
• Unscrew the plug on the grease nipple.
• Use antifreeze spray with a 2 mm spray tube. Spray in
short bursts.
• Fit covers.
IMPORTANT! Any maintenance other than that
described in this manual must be carried out by your
servicing dealer (retailer).
30 – English
MAINTENANCE