Choke Control; Blade Switch; Ignition Switch; Service Meter - Husqvarna P-ZT 54 Operator's Manual

CONTROLS

Choke Control

The choke control is used for cold starts to
provide the engine with a richer fuel mixture.
For cold starts the control should be pulled up.

Blade Switch

To engage the mower deck, pull the knob out;
mower blades are disengaged when the knob is
pressed down.

Ignition Switch

The ignition switch is placed on the control panel
and is used to start and stop the engine. On
models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
14

Service Meter

The service meter displays the total operating
time with the blade activated.
After every 50 hours of operation, an oil can icon
will appear and stay on for two hours, before an
automatic reset occurs. To manually reset the
the meter, turn the key off and on five times at
one second intervals. To service the engine and
mower, see the Service Journal of this manual.

Seat Adjustment Lever

The seat can be adjusted lengthways. The lever
is located under the right side of the seat (as
seen by the driver in the seat). When making
adjustments the lever is moved to the left.
IMPORTANT INFORMATION
be adjusted while unit is in motion.
Seat should not