Hitachi CMP4201 Service Manual page 17

(9) Remove Power Unit P.W.B.
Disconnect CN101(EH-13P),
CN102(EH-6P)CN64(VH-10P),
CN65(VH-9P),CN66(PH-7P),
CN67(PH-7),CN68(PH-6P) and CN69
( FLAT Cable).
Be careful not to be damaged the
CN69 connector folder. Remove 10
screws(v) then remove Power Unit
P.W.B.
(10) Remove Fan (H1/H2 panel)
Disconnect CN304 connector.
Remove 2screws(p) then remove Fan
fix metal.
(11) Remove Panel LOGIC P.W.B.
Disconnect CN1, CN2, CN3, CN4, CN5,
CN6 and CN7 connectors. Be careful
not to be damaged the CN2, CN3, CN4,
CN5 and CN7 connector folders.
Remove 4screws(w)
Panel LOGIC P.W.B.
(12) Remove Panel X-SUS P.W.B.
Disconnect CN21, CN22 and CN23
connectors. Be careful not to be
damaged the CN21 connector folder.
Remove 9screws(x) then remove Panel
X-SUS P.W.B. pulling out from CN24
and CN25 connectors.
(13) Remove Panel Y-SUS P.W.B.
Disconnect CN31, CN32 and CN33
connectors. Be careful not to be
damaged the CN31 connector folder.
CN34 and CN35 connector Remove 9
screws(y) then remove Panel Y-SUS
P.W.B. pulling out from CN34 and
CN35 connectors
(14) Remove Panel ABUS R P.W.B
Disconnect CN41, CN42, CN43, CN44, CN45 and CN46
Connectors. Be careful not to be damaged the CN41,
CN43, CN44, CN45 and CN46 connectors folders.
Remove 11 screws (z2), then remove Panel ABUS R P.W.B.
(15) Remove Panel ABUS L P.W.B
Disconnect CN51, CN52, CN53, CN54, CN55 and
CN56 connectors. Be careful not to be damaged
the CN51, CN53, CN54, CN55 and CN56 connector folders.
Remove 11 screws (z1), then remove Panel ABUS L P.W.B.
Screw(y) 9
then remove
17
Screw(v) 10
Power Unit
Y SUS
LOGIC
ABUS L
Screw(z1) 11
Screw(w) 4
Screw(p) 2
Screw(x) 9
X SUS
ABUS R
Screw(z2) 11