Key Lock; Lone Worker - Kenwood TK-2360 Instruction Manual

n Emergency
press and hold this key to enter emergency mode . When
the transceiver enters Emergency mode, it will change to
the emergency channel and begin transmitting based on
your dealer settings .
Note: th s funct on can be programmed on y on the aux ary
key .
n Key lock
press this key to lock and unlock the transceiver keys .
While key lock is activated, you cannot use the Auxiliary,
Side 1, Side 2, and microphone pF keys .
Note: You can st use the fo ow ng key funct ons when Key
lock s act vated: emergency, lone Worker, mon tor, mon tor
momentary, sque ch off, sque ch off momentary, key lock,
ptt + autod a , ptt + 2-tone .
n lone Worker
press this key to toggle the lone Worker function on or
oFF . if the transceiver is not operated for the
pre-programmed time, it will emit a Lone Worker tone.
Subsequently, if no operation is performed while the tone is
emitted, the transceiver will enter Emergency mode.
n low Transmit Power
Press this key to change the transmit power on the current
channel to low power, to conserve battery energy.
n Monitor
press this key to deactivate qt or dqt signaling . press
this key again to return to normal operation .