Registering Access Point Using Wi-Fi Protected Setup (Wps) - JVC Everio GZ-RX610 Detailed User Manual

Using Wi-Fi

Registering Access Point Using Wi-Fi Protected Setup (WPS)

Follow the operations below if the access point (wireless LAN router) in use
supports WPS.
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap "Wi-Fi SETTING".
(Operation on this camera)
.
4
Tap "ACCESS POINTS".
(Operation on this camera)
.
5
Tap "ADD".
(Operation on this camera)
.
110
6
Tap "EZ REGISTRATION WPS".
(Operation on this camera)
.
7
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
8
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
.
9
Select the access point, then tap "SET".
.
If several access points are registered, tap on the access point to be
0
used, then tap "USE".
To delete the access point registered, tap on the access point, then
0
tap "DELETE".