Table of Contents
Advertisement
2.2 Initialization:
Once you have completed the installation of your iPAC-GM3 interface, it
is important to allow the factory stereo time to recognize the new device.
This "hand shake" period occurs when the key is first turned-on, and lasts
up to 10 seconds. A green LED located on the top of the IPAC-GM3 will
flash during the "hand shake." ONCE THE GREEN LIGHT IS ON SOLID
THE INITIALIZATION IS COMPLETE. (NOTE: YOU MAY NOT SEE THE
GREEN LIGHT FLASH) Please do not press any buttons until initialization
is complete, or you will need to start the initializing "hand shake" process
over again by disconnecting and reconnecting the 24-pin plug from the
iPAC-GM3 and waiting through the "hand shake" period.
Chapter 3 - Operation:
Pac
This chapter will explain how to control the iPod from your factory radio In
Advanced, Manual, and Auxiliary Input Modes.
Note: All factory steering wheel controls (if equipped) remain functional and
operate the same as the corresponding buttons on the radio. Ex: SEEK ▲on
the steering wheel controls will function the same as pressing SEEK ▲ on
the radio.
3.1 Non-Navigation Radios:
Pac
8
Advertisement
Table of Contents
