Page 1
HL-2S HDMI Extender System with HDBaseT-Lite and ARC Installation Manual Power In HDBaseT Firmware HDBT + 24VDC Only Update HDMI Power HL-2S TX HDMI Extender Transmitter with HDBaseT-Lite™ Audio HDMI In SPDIF Out...
HL-2S Installation Manual Introduction INTRODUCTION Thank you for purchasing Transformative Engineering’s HL-2S HDMI Extender Kit. This product incorporates many advanced technologies to accomplish full-function, 1.4a - 2.0 HDMI compliant extension of the High Definition MultiMedia Interface protocol over one length of Category 5e/6/7 wire. Among these is certified HDBase-T technology, licensed here.
HL-2S Installation Manual Features FEATURE SET • HD / UHD4K HDMI Extender • Full HDCP Security, HDCP2.2 compliant • Audio Return Channel (ARC) • Optical Digital Audio Path • EDID Protocol Integrity • Bi-Directional IR Pass-Thru with Power for Active Pickup •...
HL-2S Installation Manual Specifications SPECIFICATIONS Input Signal: HDMI Version 1.0 thru 2.0 IR Signal – Pass Thru (Industry Compatible) IR Powered Pickup – Ring (Ground), Tip (Signal), Sleeve (+12VDC) (see page 8) Video Formats Supported: 480i/576i/480p/576p/720p/1080i/1080p/ UHD4K-60Hz-4-2-0/UHD4K-30Hz-4-4-4 Audio Formats Supported:...
HL-2S Installation Manual Transmitter Connections TRANSMITTER HDMI Input HDCP Indicator ARC Indicator HDBaseT Link Indicator Digital Optical Out (SPDIF) IRDA Out Analog Audio Out IRDA In Power Input (Choose One) Mini USB (Firmware Update) Power Indicator HDBaseT Link Connection...
HL-2S Installation Manual Receiver Connections RECEIVER HDMI Output HDCP Indicator ARC Indicator HDBaseT Link Indicator Digital Optical In (SPDIF) IRDA Out Power Input (Choose One) IRDA In Power Indicator Mini USB (Firmware Update) HDBaseT Link Connection...
HL-2S Installation Manual Transmitter Functions TRANSMITTER FUNCTIONS - See pg 7 HDMI Input – Connect this to your HDMI Source – Cable Box, Disc Player, etc. ARC Indicator – This light will illuminate whenever a completed audio signal from ARC or the TOSLINK connection is established.
HL-2S Installation Manual Recievers Functions IRDA In – Used for connecting to a 12V Xantech Compatible Powered Infra- Red Pickup Device via 3-conductor mini-jack, or to IR encoded signal for Pass- Thru to the IRDA OUT at the Receiver end. (See diagram on page 12 and 13 for suggested use) Mini USB (Firmware Update) –...
HL-2S Installation Manual Troubleshooting Power Input – Utilizing the supplied 24V .75A supply, when connected at the Receiver side, No Power Supply is necessary at the Transmitter side. Power Indicator – This light indicates that power is being supplied to the unit.
HL-2S Installation Manual IR Connection Diagrams IR Pass Thru IR Connection Diagram UTP Cable Power In HDBaseT Firmware HDBT + 24VDC Only Update HDMI Power HL-2S TX HDMI Extender Transmitter (Any) Pickup with HDBaseT-Lite™ IR Signal Audio HDMI In SPDIF Out...
HL-2S Installation Manual IR Connection Diagrams Powered Pickup IR Connection Diagram HDBaseT Firmware Power In HDBT + 24VDC Only Update HDMI Power Xantech- HL-2S TX HDMI Extender Compatible Transmitter with HDBaseT-Lite™ Pickup Audio HDMI In SPDIF Out UTP Cable Power In...
HL-2S Installation Manual Warranty WARRANTY Transformative Engineering, Inc. guarantees this product for Two Years from your original purchase. We guarantee performance and operation to published specifications including all parts and labor. We do not warranty against mis-use or abuse. To obtain warranty service, please contact our Technical Support Department at 781-769-6410 or via email at: info@ transformativeengineering.com.
Need help?
Do you have a question about the HL-2S and is the answer not in the manual?
Questions and answers