Operating Instructions
After pressing the TEST button under insulation measurement, the wire
will generate high voltage. Do not touch it to avoid electric shock.
AC/DC Voltage Measurement
To avoid electric shock, do not test if voltage to ground AC/DC is more
than 600V, even if the line voltage is below 600V.
1. Set the rotary switch to the AC or DC position.
2. Connect the red test lead to the VΩ terminal and the black test lead
to the COM terminal.
3. Connect the test leads to the circuit under test.
4. Read the voltage value on the LCD.
5. When measuring DC voltage, if the red test lead is negative
voltage, "-" will appear on the display.
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
1-877-849-2127 | info@reedinstruments.com
Black
www.reedinstruments.com
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
reedinstruments
www
Only if you REALLY need them:
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Rich Black -
20/20/20/100
11
com