Mounting The Unit In A Japanese Car; Fuse Replacement - Sony MEX-XB100BT Operating Instructions Manual

2
Mount the unit onto the bracket , then
attach the protection collar .

CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The heatsink on
the left side of the unit remains hot right after
use.
Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.

Mounting the unit in a Japanese car

You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA

Bracket
Existing parts supplied with
your car



to dashboard/center console
Bracket
NISSAN

Bracket
Existing parts supplied with
your car
Note
To prevent malfunction, install only with the supplied
screws .
Detaching and attaching the front panel
For details, see "Detaching the Front Panel"
(page 7).
Resetting the unit
For details, see "Resetting the unit" (page 7).

Fuse replacement

When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.

Note
Use an appropriate tool to replace a fuse.
to dashboard/center console
Bracket
Fuse (15 A)

33
GB