Maintenance - P3 International Mold Alert P0270 Operation Manual

Minimum/Maximum temperatures
● The highest temperature and humidity values since the last reset
can be displayed by pressing the Min/Max button on the right side
of the Mold Alert.
● The lowest temperature and humidity levels since the last reset,
can be displayed by pressing the Min/Max button a second time.
● The current values can be shown again by pressing the Min/Max
button a third time.
● The reset key is located above the Min/Max button on the right
side of the unit and is used to reset Min/Max values when they
are displayed.
if humidity levels are high
● To lower humidity, you can open windows or put a fan in the area
to better ventilate it, which may prevent mold growth.
● If there is moisture or a water leak, mold growth may have
occurred. This mold can cause health problems and the sooner
you detect it, the more likely you are to be able to control it.
● If you suspect that you have a mold problem, and the remedies
outlined in this manual prove to be insufficient, please contact a
mold control professional.
if humidity levels are low enough
The area in which you have placed the unit is safe from mold growth,
however the Mold Alert thermo-hygrometer is a useful product to have
in any home due to its accurate measurements of temperature, dew
point, and humidity.

MAintenAnce

● Do not expose the Mold Alert to extreme temperatures, vibration,
or shock.
● Clean the unit with a soft damp cloth. Do not use solvents or
scouring agents.
● Replace batteries if the unit stops working.