Table of Contents
Advertisement
Quick Links
2DNR(Digital Noise Reduction)
Day & Night IR-LED
Vari-focal Bullet Camera
OPERATING INSTRUCTIONS
TBK-BUL4700EIR36
Before installing and using the camera, please read the
instructions thoroughly and retain them for reference.
Caution
This symbol is intended to alert the user to the presence of non insulated
"dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
Warning
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Wiring methods shall be in accordance with the National Electric Code.
This product is manufactured to comply with the CE and FCC Certificate
standard.
2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TBK TBK-BUL4700EIR36
Summary of Contents for TBK TBK-BUL4700EIR36
-
Page 1: Operating Instructions
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TBK-BUL4700EIR36 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. -
Page 2: Table Of Contents
Contents Composition Confirm that the following parts are included: Composition ----------------------------------------------- 4 SUN SHIELD Explanation for Accessories --------------------------- 4 BRACKET Features ---------------------------------------------------- 5 CAMERA SERVICE MONITOR CONTROL CABLE Dimension -------------------------------------------------- 6 Parts Name ------------------------------------------------- 7 Connections ------------------------------------------------- 8 ACCESSORIES INSTRUCTION MANUAL Adjustments -------------------------------------------- 9~10 Explanation for Accessories OSD Menu Instructions ---------------------------- 11~22... -
Page 3: Features
Features Parts Name 1/3” Sony Super HAD Ⅱ High-resolution Color CCD 600TVL High-Resolution f=2.8~11mm Vari-Focal, DC Auto Iris F1.2 Day & Night Lens Built-in 2DNR, OSD function Back Light or High Light Compensation(BLC/HLC) function Auto switching IR-LED control by photocell - IR LED : 36pcs ... -
Page 4: Connections
Connections Adjustments [Adjusting Camera View] 1. Unscrew Front Case from the Rear Case. 2. Loosen Zoom &Focus screws and make necessary adjustment as shown. - Field of View : Telephoto(T) to Wide(W) - Focus : Near(N) to Infinity(∞) ▪ Power connection - DC12V Type : Requires DC12V.(Polarity) ▪... -
Page 5: Osd Menu Instructions
Adjustments OSD Menu Instructions 1. OSD Control Key (Service Monitor and Control Cable) [Adjusting Camera View] PAN : Adjusting view directions TILT : Adjusting view angle ROTATION : Adjusting screen view ■ OSD Menu Control > SET Key: Access to the menu or confirm the setting. ▪... - Page 6 MAIN MENU CONFIGURATION AREA STATE ON / OFF GAIN 0~255 LENS HEIGHT 0~15 EXPOSURE SHUTTER AUTO, 1/60, FLK, 1/250, 1/500, WIDTH 0~15 1/1000, 1/2000, 1/4000, 1/10000 LEFT / RIGHT 0~15 BRIGHTNESS 0 ~ 255 TOP / BOTTOM 0~15 OFF, LOW, MIDDLE, HIGH RETURN RET / END DWDR...
- Page 7 USER GAMMA(0.05~1.00) VERSION 00,00,01 PED LEVEL(0~63) RETURN RET / END COLOR GAIN(0~255) FACTORY RESET RESET RETURN(RET/END) RETURN RET / END NEG. IMAGE ON / OFF EXIT RETURN RET / END SPECIAL CAM TITLE OSD Menu Instructions DAY & NIGHT 3. Menu Setup The Setup is used to control and adjust the many features and options available on MOTION AREA SEL.
- Page 8 OSD Menu Instructions WHITE BAL. This function is used to control the while balance under different lighting conditions. SHUTTER : (AUTO, FLK, 1/60(1/50) ~ 1/100,000) ▪ Adjusting this setting calibrate the camera for correct color rendering. The factory The SHUTTER speed can be selected manually to user preference. default of ‘ATW1’...
- Page 9 FRONT COLOR > AREA SEL. (AREA1~AREA2) : Choose one of two pre-defined boxes to adjust its ● Change the OSD menu front color to user preference when there isn’t enough contrast size or location. between the picture and the menu to distinguish the letters. >...
- Page 10 Programming the camera ID: BURST ON - This function makes the transition between switching of the modes 1. Press the LEFT or RIGHT key to turn On the Camera Title mode. smoother when Color turns to BW. 2. While Camera ID function is On, press the SET key to enter the sub-menu. IR SMART (ON/OFF) –...
-
Page 11: Specifications
> AREA SEL. (AREA1~8): Choose one of 8 colored boxes to adjust its size or location. Specifications TBK-BUL4700EIR36 > AREA STATE (ON,OFF): Select a box active or inactive for privacy masking. ITEM NTSC > HIGHT, WIDTH: Adjust the height or width of the area. - Page 12 2DNR Day & Night IR-LED Vari-focal Bullet Camera MADE IN KOREA...
Need help?
Do you have a question about the TBK-BUL4700EIR36 and is the answer not in the manual?
Questions and answers