English - LevelOne WAP-6110 Quick Installation Manual

Hide thumbs Also See for WAP-6110:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

English

Installation (Figure 1)
1.
Please connect the WAP-6110 to the RJ-45 Ethernet Port of
your PC. Then Power-On the WAP-6110.
2.
Installation is now completed. You can now begin to
configure the device.
Check Your Network Settings to login web UI (Figure 2)
1. Please make sure your PC can get IP address automatically,
so the router can communicate with your PC during
configuration.
Select "Control Panel" > "Network Connections".
Right click the "Local Area Connection" and choose
"Properties".
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the
following screen and make sure you have selected "Obtain
IP address automatically"
Configuration
1. Start your WEB browser (Internet Explorer recommended).
In the Address box, enter the following:
http://192.168.1.1 (Figure 3)
2. When prompted, use the following User Name and password.
User Name and Password: admin (Figure 4)
3. The first time you connect to the WAP-6110, you should run
the Setup Wireless to configure the Internet Connection.
(Figure 5)
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents