DeLonghi DEP909M Installation And Service Instructions Use And Care Instructions page 36

REFIT THE DOOR
1. Hold the door firmly (fig. 34).
2. Insert the hinge tongues into the slots, making sure that the groove drops into place
as shown in the figure 35.
3. Open the door to its full extent.
4. Fully close the levers "A" on the left and right hinges, as shown in the figure 36.

IMPORTANT NOTE: For the hinge fitted with the damper pin, push the hinge lever
towards the damper pin and keep depressed. The damper pin will move into the oven
chassis slowly, allowing the hinge lever to fully rotate.
5. Close the door and check that it is properly in place.
Figure 35
36
Figure 34
Figure 36
A