Standard Control Panel - IDEAL Viscount GTE 14 Installation, Assembly And Servicing

45 Assembling the Control Panel Bracket (all control panels)
• Fit the four "Rapid nuts" on the front of the cable channels
.
• Fit the Rapid nuts in the slots
- 4 Rapid nuts for 7-17 sections,
46

Standard Control Panel

(Go directly to Figure 50 for the De Luxe Control Panel)
• Place the front crosspiece underneath the control panel
bracket and fasten from below with H8 x 30 screws and
serrated washers.
Ideal Viscount GTE -
ASSEMBLY
:
Installation, Assembly & Servicing
- 8 Rapid nuts for 18-25 sections.
• Fix the control panel bracket (package FA5 or FA6)
underneath the two cable channels by means of two H 8x
16 screws and two serrated washers.
• Fix to the side panels with two
and serrated washers
815# $
815# %
3.94 x 12.7 tapping screws
Ø
33