Operating The Dvd Menu; Stopping Playback - Pioneer AVH-P7500DVD Operation Manual

Section Section Section Section Section
10 10 08 06 04 Basic Operations Playing MP3 Playing MP3 Playing Video CDs Playing DVD audio discs
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Operating the menu by using the
Specifying track
joystick
Displaying text
You can use the direct search function to play
You can also perform most of the menu items

Operating the DVD menu

information on MP3 discs
a disc without using a menu (without PBC
by using the joystick.
playback).
Some DVDs allow you to select the disc con-
! Switch the remote control operation mode
Text information recorded on a MP3 discs can
! Only the remote control can operate this
tents using a menu.
to AVH to operate the menu by using the
be displayed.
function. To perform this function, switch
! You can display the menu by touching
joystick on the remote control. (Refer to
the remote control operation mode to DVD.
MENU or TOP.M while a disc is playing.
page 18.)
% Touch DISP.
(Refer to page 18.)
Touching either of these keys again lets you
Touch DISP repeatedly to switch between the
! During PBC playback of Video CDs, this
start playback from the location selected
1 Click the joystick during display of each
following settings:
function cannot be operated.
from the menu. For details, refer to the in-
source to display MENU.
FolderName (folder name)FileName (file
structions provided with the disc.
MENU appears on the display.
name)TrackTitle (track title)ArtistName
% Press 0e10 corresponding to a desired
(artist name)AlbumTitle (album title)
track number when the disc is stopped.
1 Touch to display touch panel keys
2 Move the joystick up or down and then
Comment (comment)BitRate (bit rate)
Track number is displayed for eight seconds
to operate the DVD menu.
click it to display the function names you
# When playing back files recorded as VBR
and playback starts from the selected track.
# When the touch panel keys are not displayed,
want to operate.
(variable bit rate) files, the bit rate value is not dis-
! To select 3, press 3.
you can display them by touching the screen.
# To go to the next group of function names,
played even after switching to bit rate. (VBR will
! To select 10, press 10 and 0 in order.
move the joystick to NEXT and click it.
be displayed.)
! To select 23, press 10, 10 and 3 in order.
2 Touch a, b, c or d to select the desired
# To return to the previous group of function
# If specific information has not been recorded
menu item.
names, move the joystick to PREV and click it.
on a MP3 disc, NO XXXX will be displayed (e.g.,
Note
NO NAME).
3 Touch ENTER.
3 Press BAND/ESC to return to the display
With some discs, the icon
Playback starts from the selected menu item.
of each source.
and operation may not be possible.
# If you switch the remote control operation
# You can return to the previous display by
mode to DVD, the joystick on the remote control
Scrolling text information pressing BACK.

Stopping playback

can also operate the DVD menu. (Refer to page
in the display
18.)
% Touch g.
Selecting audio output
# You cannot operate the DVD menu by the joy-
# When you stop MP3 playback by touching g,
This unit can display the first 20 letters only of
stick on the head unit.
You can switch between stereo and monaural that location on the disc is memorized enabling Opening and closing the
FolderName, FileName, TrackTitle,
# The way to display the menu differs depending
playback from that point when you play the disc audio output.
ArtistName, AlbumTitle and Comment.
LCD panel
on the disc.
again.
When the recorded information is longer than
# To play back the disc again, touch f. % Press AUDIO during playback. The LCD panel will be opened or closed auto-
20 letters, you can scroll the text to the left so
Press AUDIO repeatedly to switch between matically with the turning of the ignition
that the rest of the text information can be
switch on or off. You can turn off the automatic
the following outputs:
seen.
L+R (left and right channels)L (left channel) close/open function. (Refer to page 92.)
! The automatic close/open function will op- R (right channel)
erate the display as follows.
32 24 54 48 56
Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals
En En En En En
may be displayed
Introduction of advanced Skipping back or forward
% Keep touching DISP until the text infor-  When the ignition switch is turned OFF
Note
mation begins to scroll to the left. while the LCD panel is opened, the LCD
MP3 operation to another group
You can also perform the same operations using
The rest of the text information will appear in panel will close after six seconds.
L/R SELECT. To display L/R SELECT, touch
the display.  When the ignition switch is turned ON
% To skip back or forward to another
A.MENU and FUNCTION and then touch
again (or turned to ACC), the LCD panel
group, touch a or b.
NEXT.
will be opened automatically.
Touching a skips to the start of the next
 Removing or attaching the front panel
group. Touching b skips to the start of the pre-
Selecting tracks from the
will automatically close or open the LCD
vious group.
panel. (Refer to page 27.)
Group numbers are displayed for eight sec-
file name list
! When the ignition switch is turned OFF
onds.
File name list lets you see the list of file names
after the LCD panel has been closed, turn-
# You can also skip back or forward to another
(or folder names) on an MP3 disc and select
ing the ignition switch ON again (or turning
group by moving the joystick up or down.
j
one of them to playback.
it to ACC) will not open the LCD panel. In
# If you select bonus groups, you will have to
this case, press OPEN/CLOSE to open the
enter a four digit password, which you can find
C Function display
1 Touch A.MENU and FUNCTION and then
LCD panel.
on the discs packaging. (Refer to To play back
Shows the function names.
touch FOLDER&TRACK LIST.
! When closing the LCD panel, check to
bonus groups on page 86.)
make sure that it has closed completely. If
% Touch A.MENU and then touch
2 Touch PREV or NEXT to switch between
the LCD panel has stopped halfway, leaving
FUNCTION to display the function names.
the lists of names.
it like this could result in damage.
The function names are displayed and oper-
Stopping playback
able ones are highlighted.
3 Touch your favorite file name (or folder
% Press OPEN/CLOSE to open the LCD
% Touch g.
# When A.MENU is not displayed, you can dis- name).
panel.
# When you stop DVD playback by touching g,
play it by touching the screen.
That selection will begin to play.
# To close the LCD panel, press OPEN/CLOSE
that location on the disc is memorized enabling
# You can also display MENU by clicking the
# When you have selected a folder, a list of the
again.
playback from that point when you play the disc
joystick.
names of the files (or the folders) in it can be
again.
# To go to the next group of function names,
viewed. Repeat 2 and 3 to select the desired file
# To play back the disc again, touch f.
touch NEXT. Adjusting the LCD panel angle
name.
# To return to the previous group of function
# To return to the previous list (the folder one
Important
names, touch PREV.
level higher), touch UP.
# To return to the previous display, touch BACK.
! If you can hear the LCD panel knocking
# To return to the playback display, touch ESC.
against your vehicles console or dashboard,
press ANGLE (e) to move the LCD panel a lit-
tle forward. Notes
! When adjusting the LCD panel angle, be sure
! The dynamic range control is effective only on
to press ANGLE (+/e). Forcibly adjusting the
Dolby Digital sounds. (Refer to page 43.)
LCD panel by hand may damage it.
! If you do not operate the function within about
30 seconds, the display is automatically re-
% Press ANGLE (+/e) to adjust the LCD
turned to the playback display.
panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you press ANGLE (+/e) and hold.