Features; Editing; Random Assemble Editing [R.a.edit]; Insert Editing - JVC GR-SZ5000 Instructions Manual

Compact vhs camcorder

Hide thumbs Also See for GR-SZ5000:

Instructions manual (56 pages)

Instructions manual (52 pages)

Instructions manual (52 pages)

Table Of Contents

Table of Contents

RECORDING

CAUTIONS

EDITING

SPECIFICATIONS

PLAYBACK

25min

DANGER:

Tape remaining time indicator

DIAL

VIEWFINDER

Animation

A: Connection to a TV or VCR equipped

GENERAL

NOTES:

ORIGINAL TAPE (camcorder)

[Ex. : Black Fader]

SELECT

SYMPTOM

SYMBOL

INDICATION

c The recording time per charge is affected by such factors as the time spent in Record/Standby mode and

Format

with a SCART connector compatible

Video Light

Give stationary scenes or objects an illusion of

FADE IN

Gain Up

the frequency of zooming. It is safer to have spare battery packs.

Power source

OTHER

movement. This function allows you to shoot a

only with regular video signals

LOCK

OUT

Auto Lock

c Charging times noted on page 4 are for fully discharged battey pack, and discharging times are for fully

Power consumption

Viewfinder

• The video light becomes extremely hot. Do not

series of pictures, each slightly different, of the same

Transmitted beam

charged battery pack.

Light on

The tape won't eject.

touch it either while in operation or soon after

NOTE:

object for a brief period of time.

Auto Mode Lock

effective area

c Charging and discharging times vary according to the ambient temperature and the status of the battery

Light off

turning it off, otherwise serious injury may result.

Some functions are not available.

Locks the camcorder in Full Auto mode, preventing

Use the provided A/V cable and cable adapter.

NOTE:

pack.

Signal system

15°

• Do not place the camcorder into the carrying case

incorrect operation due to accidental button

c Remember to set the charge marker after charging a battery pack or after detaching a discharged one from

Video recording system

Vertical white lines appear when

immediately after using the video light, since it

CONNECT CAMCORDER TO

Make sure the camcorder is in the Record-Standby

pressing during shooting.

Tele Macro

your camcorder.

shooting a very bright object.

Luminance

remains extremely hot.

mode before performing the following steps.

• In this mode the following controls are disabled;

TV/VCR

Power indicator

c Perform the REFRESH function after no less than 5 chargings.

Colour

• When operating, keep a distance of about 30 cm

FADE OUT

EDITED TAPE (VCR)

Fade/Wipe, Wide, Title, Display, M.W.B. (Manual

15°

c High temperatures can damage the battery pack, so use only where good ventilation is available. Don't

ACCESS MENU SCREEN

(1 ft.) between the video light and people or

As shown in the illustration at left, connect the

Bright, crystal-shaped spots appear

White Balance), Manual Focus, Focus Lock,

Hi-Fi/MIX/NORMAL

allow it to discharge in container, such as a bag.

To AUDIO

object.

A/V cable to the AUDIO and VIDEO connectors

in the viewfinder.

Exposure Control and MENU.

Turn the PROGRAM AE select dial to any

Function indication

When using the remote control, be sure to

c If you stop recharging or discharging part way through, make sure to remove the battery pack before

PROGRAM AE select dial

and VIDEO

• Do not use near flammable or explosive materials.

on the camcorder and to those on the cable

position except AUTO LOCK, then press

point it at the remote sensor. The above

PROGRAM AE select dial

An error number (i.e. E03) appears

unplugging the adapter's AC cord.

Hi-Fi audio record-

connectors

adapter, and then connect the cable adpter to

MENU.

illustration shows the approximate transmitted

in the viewfinder.

STOP

c Remove the battery pack from the adapter immediately after discharging.

ing system

RELEASE

FAR

Auto Release

the SCART connector on the VCR or TV.

Fade/Wipe

beam effective area for indoor use.

SET

General Battery Precautions

c To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

SET RECORDING TIME

Mosaic Fader

Gain Up

LIGHT OFF/AUTO/ON

The transmitted beam may not be effective or

SET "Y/C"/"CVBS" SWITCH

c Make sure you unplug the DC cord before charging or discharging the battery pack.

Tele Macro

Auto Mode Release

may cause incorrect operation outdoors or

• When the C-P6U or C-P7U (cassette adapter) is

Press – or + to move the highlight bar down to

–

c A blinking CHG. indicator means that the battery pack has become hot. Wait until it cools down to

Interval Timer

The image is out of focus.

Re-enables the controls that were disabled by Auto

Set the "Y/C"/"CVBS" video out select switch

when the remote sensor is directly exposed to

not functioning even when correctly operated, the

Interval Timer

A/V cable

"Rec Time", then press FAR or NEAR to cycle

continue.

No. of audio channels

White balance

Rec Time

Mode Lock.

on the cable adapter to "CVBS".

sunlight or powerful lighting.

batteries are exhausted. Replace them with fresh

(provided)

through the choices. Stop when the desired

JLIP ID NO.

c The CHG. indicator may not light properly with a brand new battery pack, or with one that's been stored

mode indicator

To AUDIO

PROGRAM AE select dial

COUNTER R/M

Tally

ones.

time appears. Choose from "1/4s", "1/2s",

for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.

SUPPLY POWER

Cassette

and VIDEO

Set Character

• Use only the following batteries:

A character generator title and the

"1s", "5s", or select to turn the function "OFF".

indicator should light during recharging. If not, contact your nearest JVC dealer.

Tape speed

Erase protection

connectors

FG : Fog

Interval Timer Indicator

Date/Time

Turn on the camcorder, VCR and TV.

Gain Up

C-P6U or C-P7U .................... R6 (AA) size

date and time displays disappear

Then press MENU to close Menu screen.

Recording time

Tele Macro

from the viewfinder.

To MIC

Max.

Interval Tim

END :MENU KEY

Electronic Fog Filter

Rec Time

Please make note of the following rules for battery

To AUDIO,

START RECORDING

No indication (Auto)

Rec Time

SELECT MODE

(capped)

Makes the picture look misty white, as when an

FAR

use. When misused, batteries can leak or explode.

VIDEO and

STOP

JLIP ID NO

Operating temperature : 0°C to +40°C

Press the Recording Start/Stop button after

external fog filter is attached to the lens. Softens the

The wrong date and time are

Tally

-IN

Set the VCR to its AUX input mode, and set the

1. Refer to the instructions when replacing the

INDEX

1min

A/V cable

Operating humidity

focusing on the subject. The recording stops

Set Charact

image and gives it a "fancy" look.

displayed/recorded.

connectors

TV to its VIDEO mode.

1/2s

battery.

Date/Time

(provided)

Menu Screen

Storage temperature

automatically after the selected period of time.

POWER

2. Do not expose batteries to excessive heat as they

Weight

If your VCR

END :MEN

can leak or explode.

Even though the Lens Cover is open,

ASSEMBLE SERIES OF

JLIP ID NO.

Off

Start/Stop button

Dimensions

ND : ND Effect

B: Connection to a TV or VCR

has the SCART

3. Do not dispose of batteries in a fire.

the Lens Cover Warning indicator

(No indication)

connector, use

Rec Time Indicator

PICTURES

equipped with a SCART connector

4. Remove the battery from the unit if it is to be

blinks.

the provided

ND Effect

To AUDIO,

SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL

stored for an extended period to avoid battery

cable adapter.

Repeat step 3 for the desired number of

SELECT button

A black mist darkens the picture, as when an ND

CAMERA

compatible with Y/C signals

When the camcorder is swung or

VIDEO and

Tally

leakage which can cause malfunctions.

pictures.

filter is used. Helps to counter the effects of glare on

shaken, a noise can be heard.

Connectors

-IN connectors

Pick up

NOTE:

VCR (Recording deck)

the subject.

Tally lamp

Lens

RELEASE ANIMATION MODE

1.1.00

J terminal (JLIP (Joint Level Interface Protocol)

Battery Packs

Set Character

Use the Provided S-VIDEO cable, A/V cable and

If your VCR has the

Set "Rec Time" in the Menu screen to "OFF".

Connector.)

Player (JVC VCR)

SCART connector,

cable adapter.

RM-V704U or RM-V700U

Date/Time

Set Time and

(Located beneath the jack cover)

use the provided

The supplied battery pack is a nickel-

(provided)

Date Screen

CONNECT CAMCORDER TO

cable adapter.

• Connect the Editing Cable when performing

cadmium battery. Before using the

NOTES:

Sepia

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,

= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK

Random Assemble Editing (

supplied battery pack or an optional

Editing cable

TV/VCR

Viewfinder

NOTES:

J K L M N O P Q R S

The scene being shot is recorded in sepia-tinted

R.A. EDIT

etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit

c A cassette holder can't be opened unless a power supply is attached.

•It is used to connect the camcorder to a device

battery pack, be sure to read the

(provided)

T U V W X Y Z Ä Ö Ü

(reddish-brown) monochrome, giving the effect of

(battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and

As shown in the illustration at left, connect the

For best results, make sure the camcorder is

c There may be a delay after you slide EJECT until the holder opens. Do not use force.

such as a personal computer.

following cautions:

À È Ò Ì Ù Ñ Æ Ø Å &

White balance

an older movie. Use together with Wide (

NOTE:

proceed as usual from the beginning.

' – / ! ? ¿

S-VIDEO cable and the A/V cable to the S-

secured when shooting in Animation or

c The tape's remaining time is displayed in the viewfinder as shown.

: .

For further detail consult your nearest JVC

adjustment

for the authentic look of a classic Hollywood

Time-Lapse mode.

VIDEO and AUDIO connectors on the

c The indicated remaining time is approximate.

dealer. Information (in English) is also available

During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case,

1. To avoid hazard . . .

movie.

camcorder and to those on the cable adapter,

Fade/Wipe-in/out cannot be performed during

c The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary

at our home page: http://www.jvc-victor.co.jp/

use Manual Focus (

VIDEO

PROGRAM AE select dial

.... do not burn.

and then connect the cable adapter to the

Animation or Time-Lapse shooting.

according to the type of tape used.

External MIC Jack (capped) .................

USING A CAR BATTERY

Output

.... do not short-circuit the terminals.

SCART connector on the VCR or TV.

Before performing other operations following

c The tape remaining time displayed in the viewfinder is correct only if the correct tape length has been

Date

DC IN Jack .........................................

SET button

.... do not modify or disassemble.

Animation or Time-Lapse recording, make sure

selected (

pg. 8).

Use the optional Car Battery Charger/Adapter

Day/Month/Year

SET "Y/C"/"CVBS" SWITCH

The jacks

are located beneath the jack

PAUSE IN

.... use only specified chargers.

the Animation or Time-Lapse mode is deactivated.

c "TAPE END" appears when the tape reaches its end, and the power goes off automatically if left in this

(connect as shown in the above illustration).

cover.

Set the "Y/C"/"CVBS" video out select switch

condition for 5 minutes. "TAPE END" also appears when a cassette whose tape is already at its end is loaded.

2. To prevent damage and prolong service

NOTES:

AUDIO

AUDIO L, R OUT Jack ........................

NOTES:

on the cable adapter to "Y/C".

c If the Record–Standby mode continues for 5 minutes without performing Zoom or any other operations,

life . . .

NOTES:

VIDEO OUT Jack ...............................

c When using the car battery, leave the engine

the camcorder's power shuts off automatically. Set the Power switch to "POWER OFF", and then back to

Output

To switch to automatic white balance adjustment, press SET until the indication disappears, or turn the PROGRAM AE

.... do not subject to unnecessary shock.

SUPPLY POWER

Pressing and holding the Recording Start/

idling.

"CAMERA" to turn the camcorder on again.

select dial to "AUTO LOCK".

-VIDEO OUT Jack ..........................

.... avoid repeated charging without fully

Stop button allows you to record a black

Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned off and on again, or

c If the Recording Start/Stop button is pressed after the Record-Standby mode has continued for over 5

c The optional Car Battery Charger (BH-V3E) can

Turn on the camcorder, VCR and TV.

RF DC OUT Jack ................................

discharging.

when the PROGRAM AE select dial's position has been changed.

blank screen, or a mosaic pattern if Mosaic

minutes, recording may not start immediately.

also be used to charge the battery pack.

External

It is helpful to connect your camcorder to a colour monitor when adjusting the white balance ("Basic Connections"

Indicators

Fader is selected.

c If you're recording on a cassette from the middle, use the RETAKE function (

c When using the optional Car Battery Charger,

RM-V704U or RM-V700U

microphone input

SELECT MODE

pg. 30).

The screen becomes slightly reddish when

refer to the respective instruction booklet.

the last recording so you don't erase any of it.

(provided)

When adjusted by putting coloured paper in front of the subject in step 2 ("ADJUST FOCUS"), this unit makes its colour

Tally Lamp .........................................

the Fade/Wipe is used with Sepia

Set the VCR to its AUX input mode, and set the

c The LENS COVER warning blinks for about 10 seconds when the camcorder is turned on, when the cover

temperature standard for automatic white balance. So you can enjoy shooting with different colours. For example, when

Power On Indicator ...........................

(

pg. 17).

adjusting with red, blue or yellow colours, the image becomes the colour which aproximates to green, orange or purple

TV to its VIDEO mode.

is closed.

Downloaded From VideoCamera-Manual.com Manuals

respectively.

Basic Recording

Features

MODE

Audio dubbing indicator

: S-VHS/VHS PAL standard

*- - -min

NORM

: DC 6 V }

(Now calculating)

IN OUT

Auto Mode Lock

M-0:05:20

PLAY/PAUSE

: 10.2 W

60min

: 7.2 W

OFF

: PAL-type

59min

Power switch

Open the

OFF

: FM recording

cover

: Converted sub-carrier

3min

Remote sensor

RETAKE (R/F)

To J terminal

direct recording

(JLIP)

2min (Blinking)

Conforms to S-VHS

standard

-VIDEO

1min (Blinking)

connector

: Deep-layer recording

Auto Mode Release

NEAR

Fade/Wipe

0min (Blinking)

system conforming to

NORM

stereo Hi-Fi VHS

After

PROGRAM AE

OFF

Turn to take

standard

2 sec.

OFF

select dial

M.W.B.

OFF

S-VIDEO cable

up slack.

: 2 Hi-Fi audio channels 1

OFF

EDIT

15s

(provided)

normal audio channel

PLAY/PAUSE

MWB

-VIDEO

30s

NEAR

connector

Black Fader

LENS COVER

1min

Gear

: 23.39 mm/sec

Electronic Fog Filter

switch

5min

Editing cable

Mosaic Fader

(provided)

: 60 minutes

OFF

MWB

Viewfinder

(with EC-60 cassette)

1/4s

Mike

Shutter Wipe

1/2s

Index Code

S-VIDEO cable

: 35% to 80%

Marking

(provided)

Slide Wipe

: –20°C to +50°C

To DC in jack

"Y/C"/"CVBS"

: Approx. 880 g

This number is necessary when connecting the camcorder to a device such

OFF

video out

: 112 (W) x 112 (H) x

ND Effect

REW

as a computer using the J terminal (JLIP). (

select switch

232 (D) mm

Core Filter

The numbers range from 01 to 99. Factory setting is 07.

A. DUB

To Remote

PAUSE

: 1/4" format CCD

PAUSE

OFF

: F1.6, f = 3.8 to 68.4 mm,

PLAY

Allows you to input characters. (

18:1 power zoom lens

Set

"Y/C"/"CVBS"

AV OUT

with auto iris and macro

Sepia

Allows you to set the current date and time (

video out

control, filter diameter

To Pause-In

select switch

46 mm

pg. 37).

: Electronic viewfinder

with 0.5" B/W CRT

VCR (Recording deck)

: Auto/Manual adjustment

AV IN

RM-V704U or

Terminals

RM-V700U

pg. 19).

Recording deck

(provided)

: 1 Vp-p, 75 ohms,

Time

unbalanced (via VIDEO

24-hour indication

START/STOP

out connector)

VISS

INT. TIME

: –8 dBs, 1 k-ohm

REC TIME

(via AUDIO out

RM-V704U or

connector)

RM-V700U

(provided)

: –68 dBs, high

impedance, unbalanced

with ø3.5 mm (STEREO)

Load

Vide

Date

OPE

SEL

When n

SET

scene b

Manual Focus

NOTE:

DIAL

AUTOMATIC EDITING TO VCR

Fade/Wipe

Character Generator

Manual White Balance Adjustment (M

Tape Dubbing

MAKE CONNECTIONS

Audio Dubbing

Time-Lapse

C:Connection to a TV or VCR equi

AC POWER ADAPTER/BATTERY CHARGER

.... charge in an environment where

FEATURE:

SYMBOL

temperatures are within the tolerances shown

(AA-V11EG)

You should already have performed the procedures listed

with an S-VIDEO IN and/or A/

These effects let you make pro-style scene transitions.

You can enter an original title of up to 18 characters.

PURPOSE:

NOTE:

PURPOSE:

You can record a new soundtrack on a prerecorded tape

This camcorder's Automatic Colour Temperature system

CONNECT TO . . .

CONNECT EQUIPMENT

ENGAGE VCR'S RECORD–PAUSE

You can record sequentially at preset time spans.

in the chart below. This is a chemical

To record a subject in a dimly lit environment. When it is

below. If not, do so before continuing.

Power requirement

Fade- or wipe-in works at recording start, and fade- or

senses the colour temperature of the ambient lighting for

(in MONO on the normal audio track only.).

Leaving the camcorder aimed at a specific subject,

reaction type battery—cooler temperatures

OUT

more convenient to shoot with a less coarse picture although

You should already have made the necessary viewfinder

input (RCA type) connectors

ACCESS MENU SCREEN

c Power (

pg. 4)

MODE

First set the power switch to "CAMERA". Turn the

Slide EJECT until the holder opens. Do not use force

Following the illustration at left, connect the

wipe-out works at recording end or when you enter

automatic white balance adjustment. However, precise

JVC VCR EQUIPPED WITH REMOTE

OPERATION:

you can record subtle changes over an extended

OPERATION:

impede chemical reaction, while warmer

the subject becomes slightly dark.

adjustments (

** Perform steps 1, 2 and 3 of the Insert Editing procedure

c Date/Time Setting (

to open.

PROGRAM AE select dial to any position except

The battery pack is running low.

OPERATION:

camcorder and the VCR. (refer also to page 30 and

colour adjustment is not possible under the following

Power consumption

Record–Standby mode.

Turn the PROGRAM AE select dial to any position

NOTE:

period of time.

Point the remote control toward the VCR's infrared

PAUSE TERMINAL

Twilight

temperatures can prevent complete charging.

continuing.

(

pg. 42) before continuing.

c Tape Length Setting (

AUTO LOCK.

conditions:

31)

Allows you to shoot dark scenes with no picture brightness

Output

except AUTO LOCK, then press MENU.

sensor and press VCR REC STBY, or manually

The PROGRAM AE select dial is set to "AUTO LOCK".

Set the LIGHT OFF/AUTO/ON as required.

Connect the editing cable to the Remote PAUSE

INSERT/REMOVE CASSETTE

Dusk, twilight scenery, fireworks, etc., look more

.... store in a cool, dry place. Extended exposure

NOTES:

•The sound comes from the built-in mike (or an external

SELECT MODE

c Recording Format Setting (

Use the provided A/V cable and S-VIDEO cable.

NOTE:

• When an object is in various shades of the same colour.

adjustment.

SELECT MODE

engage the VCR's Record-Pause mode.

terminal.

natural and dramatic. The following happens when

to high temperatures will increase natural

ACCESS MENU SCREEN

PREPARE FOR DUBBING

mike if connected).

• When a predominantly red or brown object is being shot

c Grip Adjustment (

: Always keeps the light on as long as the

This sometimes occurs when the contrast between the

ACCESS CHARACTER SET MENU

Make sure the label is facing outward.

Turn the PROGRAM AE select dial to any position

CONNECT CAMCORDER TO

Make sure the camcorder is in the Record-Standby

Twilight mode is selected:

discharge and shorten service life.

Usually set to this position.

outdoors.

JVC VCR NOT EQUIPPED WITH REMOTE

Turn the PROGRAM AE select dial to any position

camcorder is turned on.

background and the object is great. It is not a defect of

BEGIN AUTOMATIC EDITING

Charging system

Press MENU .

Set the camcorder's Power switch to "PLAY", turn

FIND EDIT-IN POINT

except AUTO LOCK.

mode before performing the following steps.

LOAD A CASSETTE

In these cases, use the camcorder's built-in preset filters for

Press + or – to move the highlight bar to "Set

•Auto gain control is turned off.

.... avoid prolonged uncharged storage.

TV/VCR

except AUTO LOCK.

AUTO : Automatically turns on the light when the

PAUSE TERMINAL.

the camcorder.

Usually the distance to a subject where the lens is in focus

on the VCR's power, and insert the appropriate

white balance adjustment.

Character", then press NEAR. The Character Set

•White Balance is set to "

.... remove from charger or powered unit when

Press EDIT on the camcorder, and the previously

CLOSE CASSETTE HOLDER

camcorder senses insufficient lighting on

Press REW to go a little beyond the beginning of the

SELECT FUNCTION

Slide EJECT to open the cassette holder, then insert

ACCESS MENU SCREEN

depends on the zoom magnification. Unless there is a

Connect the editing cable to the R.A. EDIT

cassettes in the camcorder and the VCR.

As shown in the illustration at left, connect the

Sunlight is directly entering the lens.

NOTE:

menu appears.

ADJUST FOCUS

can also be manually changed to another mode

not in use, as some machines use current

selected scenes are copied to the VCR in the

SELECT FUNCTION

the subject.

SELECT MODE

scene onto which you want to dub new audio, press

the cassette with the label facing out. Press PUSH to

distance more than 1m to the subject, the lens is out of focus

Dimensions

connector.

Press PUSH and make sure the holder is closed and

S-VIDEO cable and/or the A/V cable to the S-

Press SELECT repeatedly until "

even when switched off.

specified order.

(

Turn the PROGRAM AE select dial to any

pg. 25).

OFF

SELECT VCR MODE

: Turns off the light.

PLAY to view the recorded tape, then press PAUSE

ensure the holder is closed and locked.

at the maximum telephoto setting. When set to "ON", you

INPUT CHARACTERS

To farther subject . . .

locked.

Press – to move the highlight bar down to "Date/

VIDEO (or the VIDEO) and AUDIO connectors

FEATURE:

NON-JVC VCR WITH NEITHER

Turn the PROGRAM AE select dial to any position

appears.

•Auto Focus becomes available only in the range of

position except AUTO LOCK, then press

Turn the camcorder's power off, then disconnect the

3. To prevent damage to the camcorder . . .

at exactly the point where dubbing should start.

can shoot a subject as large as possible at a distance of

Weight

FEATURE:

END AUTOMATIC EDITING

Time", then press NEAR. The Set Date And Time

except AUTO LOCK.

on the camcorder and to those on the VCR or

Engage the VCR's AUX and Record-Pause modes.

Press and hold FAR. The Manual Focus indications

Connect the editing cable to the RM-V704U/

PURPOSE:

•The video light can be used with the camcorder's

10 m to infinity. To focus when the subject-to-

MENU.

ENTER RECORD–STANDBY MODE

Press +, –, FAR or NEAR to make the desired

power source. After a few minutes, try turning the power

.... replace the battery pack when it begins to

approx. 60 cm.

ENGAGE FADE- OR WIPE-

screen appears.

TV.

PURPOSE:

" appear and " " blinks.

V700U's Pause-In jack.

ENGAGE AUDIO DUB STANDBY

power on.

camera distance is less than 10 m, use manual

OPERATION:

character blink, then press MENU. The selected

on again. If the error number still appears in the view-

When all selected scenes have been copied, the

SELECT FUNCTION

deliver less recording time per charge.

CASSETTE ADAPTER (C-P7U)

Slide the LENS COVER open/close switch to open

•Depending on the zoom position, the lens may go out of

NOTES:

SET INTERVAL BETWEEN

Go to step 3.

•It is recommended to set the white balance

focusing (

OPERATION:

STANDBY MODE

characters appear at the bottom of the screen.

finder, consult your nearest JVC dealer.

camcorder and VCR enter the still or pause mode.

SUPPLY POWER

MODE

SET DATE/TIME

FIND EDIT-IN POINT

PREPARE CAMCORDER

NOTE:

the lens cover, then set the power switch to

focus.

Dimensions

Press SELECT reapeatedly until "

c A cassette holder can't be opened unless a power

(

pg. 25) to indoor mode ( ) when you use the

RECORDINGS

Repeat as many times as desired (max. 18).

To nearer subject

Press STOP on both units.

"CAMERA".

Press SET to cycle through the modes as shown at

The diopter needs to be adjusted (

Turn on the camcorder, VCR and TV.

Press FAR or NEAR until the item you want to set

video light.

supply is attached.

Press and hold

It is normal for the battery pack to be warm after

Engage the camcorder's Play mode to find a spot

This feature allows you to set the parameters for Self-Timer

Insert a recorded tape and set the Power switch to

Press and hold NEAR. The Manual Focus indications

left. Once the desired mode appears, it is selected

Press – or + to move the highlight bar down to

The scene being shot is adversely affecting the operation

Weight

•To select the location of the next character, press

•When not using the video light, turn it off to save

begins blinking, then press + or – to until the correct

c Make sure that the tape is not slack when loading the

A. DUB, press and release PAUSE.

•When finished editing, be sure to disconnect the

charging, or after use.

just before the edit-in point. Once it's reached, press

(

pg. 28) and Time-Lapse recording (

"PLAY".

NOTE:

SELECT WHITE BALANCE

" appear and " " blinks.

•The power indicator lights and the camcorder

and reserved.

"Interval Timer", then press FAR or NEAR to

of Auto Focus (

Accessory

+, –, FAR or NEAR to make the row of squares

setting appears.

Temperature Ranges

battery power.

cassette. If there is any slack, turn the gear on the

editing cable and the audio/video cable.

PAUSE on the camcorder.

SELECT MODE

cassette

enters the Record–Standby Mode.

BEGIN AUDIO DUBBING

Go to step 3.

cycle through the choices. Stop when the

PREPARE VCR

Sports

Press SET (Manual White Balance) until the required

blink at the bottom of the screen, then press FAR

cassette in the direction of the arrow to take up the

Charging ................................... 10°C to 35°C

If you remove the power source from the camcorder while

•The selected mode's name and its indication are

•The scene you're aimed at appears on the

desired time appears. Choose from "15s",

START EDITING

•If you decide you want to return the date and time

High shutter speed clearly captures fast-moving

Provided Accessories ......................

Set the VCR to its AUX input mode, and set the

NOTES:

indication appears in the viewfinder.

NOTES:

or NEAR to move the blinking cursor underneath

slack.

Operation ................................. 0°C to 40°C

the power is on, all settings and selections are erased.

displayed in the viewfinder for approx. 2 seconds.

Press PLAY. When the counter reaches "0:00:00",

Turn the power on, insert a recordable tape and

LOCK FOCUS

viewfinder screen, with the word "PAUSE"

"30s", "1min", "5min", or select to turn the

to the previous settings, press FAR or NEAR to

action.

TV to its VIDEO mode.

the desired location. Press + when you're done,

c Make sure the Erase Protection tab is in the position

FEATURE:

Storage ...................................... –10°C to 30°C

Make sure to turn the camcorder's power off before

Then the name disappears, and only the indication

c Even if the battery indicator (

Audio Dubbing stops automatically and the

Press PLAY on the camcorder and engage the VCR's

If you performed step 1

engage the AUX mode (refer to VCR's instructions).

superimposed upon it.

"MWB" ..... With a memorized personal White Balance

This feature allows you to set the parameters for Animation

function "OFF".

move the highlight bar to "Cancel", then press

Optional Accessories

Release FAR or NEAR. The focus indication is

and the blinking cursor returns to the character

that allows recording. If not, slide the tab. Some

disconnecting the power source.

PURPOSE:

remains.

viewfinder, if the battery pack's charge is low, the

camcorder enters the Audio Dub-Standby mode.

Record mode.

NOTES:

CONNECTIONS"), keep the remote control pointed at

and Time-Lapse recording (

MENU .

replaced by the focus lock indication "

grid.

cassettes have removable tabs. If the tab has been

START SHOOTING

NOTE:

camcorder may turn off automatically when you turn

" ......... Outdoors on sunny day

the VCR during editing.

SET RECORDING TIME

•Battery Packs BN-V12U, BN-V22U, BN-V25U

If you have not performed Date/Time Setting (

D: Connection to a TV with NO A/V

DC OUT

Recharging time is based on room temperature of

1/1000

•If you're satisfied with the settings, go on to step 5.

START RECORDING

END AUDIO DUBBING

adjusted focus is locked in.

STOP EDITING TEMPORARILY

removed, cover the hole with adhesive tape.

NOTES:

"......... Outdoors on cloudy day

on the video light, or when you start recording with the

The on-screen display only appears while the

OPERATION:

•Car Battery Charger BH-V3E

END CHARACTER SETTING

Press the Start/Stop button.

the date and time are not displayed/recorded correctly. Be

terminal

20°C.

Press – or + to move the highlight bar down to

c The cassette holder can't be opened while the

" .......... Light source is halogen or tungsten lamp

Input Connectors (Playback ONLY

video light turned on.

camcorder searches for each scene.

START CLOCK OPERATION

Press Recording Start/Stop to start recording and

Engage the VCR's Record-Pause mode and press

Press STOP.

RELEASE MANUAL FOCUS MODE

If your VCR has an S-VIDEO input connector or a

•RF Unit RF-V5E

sure that Date/Time setting is carried out.

The lower the temperature, the longer recharging

"Rec Time", then press FAR or NEAR to cycle

camcorder is in the record mode.

Press +, –, FAR or NEAR to make "End" blink, then

There may be noise at in- or out-points on the edited

c When the LIGHT OFF/AUTO/ON switch is set to

activate fade- or wipe-in.

PAUSE on the camcorder.

SCART connector compatible with Y/C signals, connect

takes.

•S-VHS-C Cassettes SE-C45/30

MWB

through the choices. Stop when the desired

Once you've set the date and time, press FAR or

1/2000

The Lens Cover Warning indicator may blink when the

Press FAR and NEAR simultaneously. The Manual

press MENU twice to return to the normal screen.

NOTE:

tape with certain VCRs.

"AUTO":

•The tally lamp lights while recording is in progress,

the camcorder and the VCR using the provided

OR . . .

•VHS-C Cassettes EC-60/45/30

time appears. Choose from "1/4s", "1/2s",

NEAR until "Set" begins to blink, then press MENU .

camcorder is used in dark areas, regardless of the position

MWB sets the colour temperature for the subject's light

Focus mode is immediately released and the focus

EDIT MORE SEGMENTS

• Depending on the lighting conditions, the video light

and "

REC

NOTE:

S-VIDEO cable. This can improve the dubbed picture

Use the optional RF-V5E RF unit.

"1s", "5s", or select to turn the function "OFF".

The Menu screen reappears.

•Active Carrying Bag CB-V7U

source so you can shoot with natural colours that are

High-Speed Shutter (1/1000s., 1/2000s.)

of the Lens Cover.

lock indication disappears.

Cassettes

NOTES:

may keep turning on and off. In this case, manually

quality.

END RECORDING

Repeat steps 4 through 6 for additional editing, then

Connect it to the camcorder's VIDEO, AUDIO L

unaffected by surroundings, even when there are multiple

Then press MENU to close Menu screen.

NOTES:

STOP RECORDING

•Wireless Remote Control Unit RM-V704U or

Captures faster action than Sports mode.

switch the light on or off using the LIGHT OFF/

This camcorder is equipped with Auto Pause System

CLOSE MENU

If you use the provided cable adapter, set the "Y/C"/

The tally lamp comes on to signal the start of recording.

Do not press FF or REW during Audio Dub-Standby, or

stop the VCR and camcorder when finished.

subjects with different colour temperatures.

and RF DC OUT connectors.

NOTES:

To properly use and store your cassettes, be sure to

RM-V700U

Press Recording Start/Stop to end recording and

AUTO/ON switch.

To erase a character you entered mistakenly, make

which has a sensor for detection. Because of the sensor,

Press the Start/Stop button again to stop recording.

START TIME-LAPSE

the edit points will not be accurate.

"CVBS" video out select switch as required.

Other Parts

DC cord

Using the RM-V704U/V700U, it is also possible to perform

* Refer to the RF-V5E instruction manual for the

The tally lamp remains off at all times.

Press MENU .

read the following cautions:

engage fade- or wipe-out.

FEATURE:

• While the Sports or High-Speed Shutter mode

SELECT MODE

c Be sure to focus the lens in the maximum telephoto

"Clear" blink by pressing +, –, FAR or NEAR, then press

when the camcorder is swung or shaken, noise can be

If the mike is too close to the TV, or if the TV's volume

Y/C

: When connecting to a VCR which accepts Y/C

Some acccessories are not available in some areas.

deck-to-deck Random Assemble Editing. The playback

RECORDING

connection procedure.

(

pg. 17) is engaged, the light is likely to stay on.

position when you use the Manual Focus mode. If you

MENU. All characters are deleted at once. Or, to erase

1. During use . . .

Video Light ........................................

NOTES:

PURPOSE:

heard from the sensor. This is not a malfunction.

is too high, whistling or howling may occur.

signals and uses an S-VIDEO cable.

pg. 23).

TO CANCEL FADE- OR WIPE-

Please consult your nearest JVC dealer for details on

Turn the PROGRAM AE select dial to any position

deck must be an R.A. Edit-capable JVC VCR. The recording

• While the Twilight mode (

•The camcorder re-enters the Record-Standby

focus in on a certain subject in the wide-angle position,

selected characters only, first move the blinking cursor

During Audio Dubbing, only the dubbed sound is

Press the Recording Start/Stop button.

CVBS : When connecting to a VCR which does not

• Camera sensor

.... make sure the cassette bears the S-VHS-C or

except AUTO LOCK.

accessories and their availability.

NOTES:

deck can be...

If your VCR has an S-VIDEO input connector or a

STANDBY MODE

light will not activate.

mode.

sharply focused images cannot be obtained when

to the character at the bottom row which you want to

output. After Audio Dubbing is finished, press Hi-Fi/

Recording and intervals alternate

OPERATION:

Be careful not to cover this area; built-in

VHS-C mark.

accept Y/C signals and uses an audio/video

a VCR other than JVC, or

SCART connector compatible with Y/C signals, connect

NOTES:

ADJUST FOCUS

zoomed up because the depth-of-field is reduced at

MIX/NORMAL to select the required playback audio

It is recommended to use the AC Power Adapter/

replace, then press +, FAR or NEAR to highlight " " in

E.&O.E.Design and specifications subject to change

automatically.

.... be aware that recording onto prerecorded

here is the sensor necessary for shooting.

cable.

While "

a JVC VCR which has neither a Remote PAUSE nor an

Fade/Wipe

the camcorder and the VCR using the provided S-

soundtrack (

longer focal lengths.

Charger as the power supply instead of the battery

c To display the date and time in the viewfinder and on a

the top left corner, and then press MENU.

without notice.

• Remote sensor .................................

tapes automatically erases the previously

Point the camcorder at a white, flat object such as a

R.A. EDIT connector

VIDEO cable. This can improve the dubbed picture

RELEASE TIME-LAPSE MODE

• HiFi

: You can hear the original sound on the

pack.

c When the focus level cannot be adjusted any farther or

To display the characters you have set — "Instant

connected TV, see "Date/Time Character Insert"

recorded video and audio signals.

DANGER

Microphone .......................................

sheet of white paper, and adjust focus manually

quality.

How to use:

prerecorded tape.

closer, " " or "

To monitor the picture and sound from the

(

Titles" (

•"OFF" is displayed for approx. 2 seconds and the

pg. 24).

pg. 22) or "Date/Time/Character Insert"

(

.... make sure the cassette is positioned properly

pg. 19).

To release when the tally lamp is not blinking,

Car Battery Charger/Adapter

•The video light become extremely hot. Do not

LCD window

If you use the provided cable adapter, set the "Y/C"/

pg. 22)

• Mix

: You can hear the dubbed sound and the

camcorder without inserting a tape, set the

c If, in step 4, you input an invalid date (30. 2, 31. 6,

(

pg. 24).

reserved fade or wipe is cancelled.

— Connect the playback deck and RM-V704U/V700U as

when inserting.

set "Rec Time" and "Interval Timer" in the

BH-V3E (optional)

touch it either while in operation or soon after

Program Manager Function Indicator

"CVBS" video out select switch as required.

original one on the prerecorded tape.

ADJUST WHITE BALANCE

camcorder's Power switch to "CAMERA", then set

Characters may be set only in the Record-Standby

etc.) and perform step 5, "Input Error" appears blinking

shown on the left.

.... do not load and unload the cassette

Menu screen to "OFF". To release when the

turning it off, otherwise serious injury may result.

Full Auto Indicator

Y/C

: When connecting to a VCR which accepts Y/C

• Normal: You can hear the dubbed sound.

your TV to the appropriate input mode.

at the bottom of the screen. Press +, –, FAR or NEAR to

mode.

— Set the RM-V704U/V700U to correspond to the brand

repeatedly without allowing the tape to run

Press SET until "MWB" appears, then press and hold

tally lamp is blinking, press the Recording

Black Fader

Displayed when the Program AE Select Dial

•Do not place the camcorder into the carrying case

signals and uses an S-VIDEO cable.

If you have a TV or speakers that are not specially

input the correct number.

NOTES (for Insert Editing and

pg. 43

of the recording deck. (

at all. This slackens the tape and can result in

SET for more than 3 seconds.

USING AC POWER

Start/Stop button to stop the blinking, then set

immediately after using the video light, since it

is set to Auto Lock.

Fades in/out to a black screen.

CVBS : When connecting to a VCR which does not

shielded, do not place the speakers adjacent to

— For Random Assemble Editing procedure, please refer to

damage.

pg. 5

NOTE:

"Interval Timer" and "Rec Time" in the Menu

Audio Dubbing):

remains extremely hot.

Tape Loaded/Remaining Tape Indicators

accept Y/C signals and uses an audio/video

• "MWB" blinks in the viewfinder during adjustment,

the TV as interference will occur in the camcorder

Use the AC Power Adapter (connect as shown in

Mosaic Fader

the instruction manual of the JVC VCR you are using as

.... do not open the front tape cover. This

screen to "OFF".

•When operating, keep a distance of about 30 cm.

Remaining Battery Power Indicator

cable.

Insert Editing and audio Dubbing may not work

then stops blinking but stays lit when adjustment is

the above illustration).

playback picture.

FEATURE:

the playback deck.

exposes the tape to fingerprints and dust.

Gradually turns/returns the picture into/from a mosaic

NOTES:

between the video light and people or objects.

Shoulder Strap Eyelets ........................

complete.

correctly if the tape contains blank segments, or if the

PURPOSE:

pattern.

Notes:

•Do not use near flammable or explosive materials.

2. Store cassettes . . .

NOTES:

pg. 30

recording speed was changed during the original

Clock Battery Compartment ................

•It is recommended that you consult your nearest

.... away from heaters or other heat sources.

recording.

pg. 30

RM-V704U/V700U cannot be used to control the playback deck.

OPERATION:

c The supplied AC Power Adapter/Charger features

Battery Pack Mount ...........................

Shutter Wipe

JVC dealer for replacing the video light.

To edit/dub onto a tape with the recording safety tab

.... out of direct sunlight.

RM-V704U/V700U is capable of controling basic operations of

automatic voltage selection in the AC range from

pg. 30

VIDEO LIGHT OFF/AUTO/ON

A black screen moves in from the top and bottom,

removed, cover the hole with adhesive tape.

.... where they won't be subject to unnecessary

the recording deck. While pressing VCR CTL, press PLAY, STOP,

110 V to 240 V.

pg. 31

Switch ................................................

closing over the image like a shutter, or a new image

Do not press STOP during Insert Editing or Audio

PAUSE, FF or REW for these functions. (Not possible with some

shock or vibration.

NOTE:

c When using the provided DC cord, make sure

pushes open the black screen vertically from the centre.

Electronic Viewfinder .........................

brands and models). Other buttons cannot be used.

Dubbing, or the edit points will not be accurate.

.... where they won't be exposed to strong

you connect the end of the cable with the core

To put the recording deck in the Record-Pause mode, use the

During Insert Editing and Audio Dubbing, when Insert–

LENS COVER Switch .........................

magnetic fields (such as those generated by

Slide Wipe

filter to the camcorder. The core filter improves

controls on the recording deck itself.

Pause or Audio Dub–Standby is engaged, the counter

pg. 11

Grip Strap ..........................................

motors, transformers or magnets).

performance of equipment.

A black screen moves in from the left to gradually cover

may go slightly past "0:00:00". Recording, however,

pg. 11

.... vertically, in their original cases.

Tripod Mounting Socket ......................

the image, or a new image moves in from right to left.

stops at exactly 0:00:00.

VIEWFINDER

Quick Review

Self-Timer, Animation and Time-Lapse

Manual Tracking

POSSIBLE CAUSE(S)

INDICATION

The remote control lets you set/release

To check the end of the last record-

To eliminate noise bars that appear

Interval Timer and Rec Time functions as

: AC 110 to 240 V` ,

ing.

on the screen during playback.

Twilight

well as the Menu screen.

50/60 Hz

1) Press "

" and release quickly

1) Press either +/– button as many

pg. 6). If you haven't, do so before

pg. 7)

Self-Timer

: 23 W

during the Record–Standby mode.

times as necessary for best picture.

pg. 8)

1) Set

: DC 8.5 V } , 1.3 A

• Tape is rewound for about 2

To reset TRACKING to the original

Instead of performing steps 1 through 3

pg. 8)

(CHARGE),

seconds and played back

preset, press both + and – buttons

on pg. 28 ("Self-Timer"), press INT.

pg. 10)

DC 6.3 V } , 1.8 A (VTR)

automatically, then pauses in

TIME on the remote control. Each time

simultaneously.

: Constant current, peak

Record–Standby mode for the

INT. TIME is pressed, the Interval Timer

Manual Tracking may not work

detection, timer

indicator appears, changing in the

next shot.

with tapes recorded on other VCRs

" (outdoor mode), but

controlled

following order: 15s, 30s, 1min, 5min

Distortion may occur at start of

or camcorders.

: 150 (W) x 42 (H) x

and No indication (off).

playback. This is normal.

Fade/Wipe

2) Release

68 (D) mm

Still Playback

Instead of setting "Interval Timer" to

: Approx. 350 g

Retake

To pause during playback.

"OFF" in the Menu, press INT. TIME on

To re-record certain segments.

the remote control until the Interval

1) Press PLAY/PAUSE during

Timer indicator disappears.

pg. 19).

1) Make sure the camcorder is in the

playback.

: 188 (W) x 25 (H) x

M.W.B.

Animation

Record–Standby mode.

2) To resume normal playback, press

. . .

pg. 6).

1) Set

104 (D) mm

2) Press either RETAKE button to

, and without releasing

A. DUB

PLAY/PAUSE again.

Instead of performing steps 1 and 2 on

Sports

: Approx. 240 g

reach the start point for new

pg. 29).

Noise bars appear and pictures may

pg. 18).

pg. 29 ("Animation"), press REC TIME

: "R6 (AA)"-size battery x 1

recording.

become monochrome during Still

on the remote control. Each time REC

Pressing "F" forwards the tape and

FADE/WIPE

Playback. This is normal.

TIME is pressed, the Rec Time indicator

pressing "R" reverses it.

appears, changing in the following

WIDE

3) Press Recording Start/Stop to start

Shuttle Search

order: 1/4s, 1/2s, 1s, 5s and No

) does not blink in the

on page 37 ("MAKE

FULL

recording.

indication (off).

To allow high-speed search in either

setting (see below)

TITLE

To AC outlet

pg. 29).

2) Release

AUTO

direction.

Noise may appear during Retake.

S 1/1000

Instead of using the Menu in step 5 on

DISPLAY

This is normal.

Forward Search

pg. 29, press REC TIME on the remote

1) Press FF during playback.

control until the Rec Time indicator

M.W.B.

Reverse Search

disappears.

S 1/2000

1) Press REW during playback.

Time-Lapse

AC Power

pg. 47)

" appears in the viewfinder.

1) Set

Noise bars appear and pictures may

Adapter/Charger

Instead of performing steps 1 through 3

become monochrome or darken in

AA-V11EG

on pg. 29 ("Time-Lapse"), press INT.

Shuttle Search. This is normal.

TIME and REC TIME on the remote

control. Each time INT. TIME is

To car's

Counter Memory Function

pressed, the Interval Timer indicator

cigarette

To make it easier to locate a specific

appears, changing in the following

Can

lighter socket

pg. 17) is engaged, the

tape segment.

order: 15s, 30s, 1min, 5min and No

pg. 7).

1) Press COUNTER R/M and hold for

indication (off). Each time REC TIME is

pressed, the Rec Time indicator

more than 2 seconds. The counter

" is displayed, press SET twice.

pg. 32).

appears, changing in the following

resets to "0:00:00".

order: 1/4s, 1/2s, 1s, 5s and No

2) Press COUNTER R/M. "M"

indication (off).

" will blink.

appears.

2) Release

3) After recording or playback, press

Instead of using the Menu in step 5 on

STOP, then REW. The tape

pg. 29, press INT. TIME and REC TIME

automatically stops at or close to

on the remote control until the

0:00:00.

pg. 36)

indicators disappear.

4) Press PLAY/PAUSE to start

Also refer to pgs. 28 and 29.

playback.

Index Code Marking

The counter memory functions in

To give you automatic access to any

the FF and REW modes.

selected point on a recording.

To disable Counter Memory

1) Press VISS once to place the index

Function, press COUNTER R/M so

code. "INDEX" blinks in the viewfinder

the "M" disappears.

during marking.

If VISS is pressed during Record–Standby

mode, the mark is placed where

pg. 13) to find the end of

Recording Start/Stop is pressed.

MODE

" appears.

pg. 3

" and the

1/1000 sec.

pg. 7),

High Speed Shutter

1/2000 sec.

High Speed Shutter

10:

pg. 15

pg. 41

pg. 43

pg. 10

pg. 6

pg. 4

pg. 15

pg. 6

pg. 11

pg. 10

Table of Contents

Features; Editing; Random Assemble Editing [R.a.edit]; Insert Editing - JVC GR-SZ5000 Instructions Manual

EDITING

Features

Audio Dubbing

Related Manuals for JVC GR-SZ5000

Related Content for JVC GR-SZ5000

Table of Contents