Dubbing Files To A Vcrjdvd Recorder - JVC GZ-MG680 Instructions Manual

Copying Files
(Continued)
Dubbing Files to a VCR/DVD Recorder
1
Open the LCD monitor to turn on the
camcorder.
• To connect using the AV connectors
(analog dubbing)
Preparation:
• Create a playlist.
• IGZ-MG6801IGZ-MG6501
Set [SWITCH TO
ANALOG I/O] to [OUTPUT].
• Turn off all units.
AV Cable
2
Set the VCRlDVD recorder to its AUX
input mode.
Check that the images from the camcorder
are input correctly to the VCR/DVD
recorder.
3
Play back playlists on the camcorder.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the first and
the last scene.)
4
At the point you want to start
dubbing, start recording on the VCRI
DVD recorder.
Refer to the VCR/DVD recorder's
instruction manual.
• To stop dubbing
Stop recording on the VCR/DVD recorder.
• To hide the date or icons on the screen
Change the settings in [DISPLAY ON TV].
AV Connector DC Connector
AC Adapter
To AC Outlet
VCRlDVD Recorder
AV Connector
(Input)
Switching indication modes on LCD
monitor
Each time you touch DISPLAY, indications
on LCD monitor switch as shown below;
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/No
indications
34
EN