Deselection Of A Zone/Group (Led Turned On); Selection Of A Key Not Set; Recording A Message; Live Vocal Message And Broadcast A Recorded Message - Bodet harmonys Installation And Operating Instructions Manual

4.3.2 Deselection of a zone/group (LED turned on)

1/ Press the key of the zone or group that must be deselected
for at least 3 seconds.
2/ The LED of the key corresponding to the deselected zone or
group is turned off.
3/ The microphone screen displays the name of the
programmed zone or group which is deselected:

4.3.3 Selection of a key not set

1/ When you press a key that is not set (not associated with a
zone or a group), the key LED remains off and the LCD
shows :

4.4 Recording a message

The recording is started by pressing and holding
1/ Press . The recording can be started only after
a 3 sec. countdown which is displayed on the microphone
screen:
2/ At the end of 3 seconds speak for record the message. The
LCD screen shows:
3/ Finish recording by releasing
The LCD screen shows:
Note: when recording, the

4.5 Live vocal message and broadcast a recorded message

A live vocal message is started by pressing
a live vocal message / live broadcast state.

4.5.1 Vocal message status when no zone or group is selected

1/ If no zone or group is selected when pressing
3 seconds) no sound is broadcasted and the microphone LCD
screen displays:
4.5.2 Broadcast a LIVE vocal message with in more zone/groupselected
1/ When pressing
groups. The LCD screen displays:
2/ Hold the to broadcast a live vocal message. The LCD
screen displays:
3/ Release the
screen displays:
18
.
is disabled.
a jingle is played on the selected zones or
to stop the live broadcast. The LCD
.
. While this button is pressed, the microphone is in
(for at least
Name zone
OFF
Name group
OFF
Key not
associated
Recording
in 3s
Recording
of message
Recording
completed
No
selection
Broadcast
of jingle
Broadcast
message
Broadcast
completed