Yamaha YTF2 Owner's Manual page 47

B
Recommended oil:
SAE 90 gear oil
Gearcase capacity:
SAE 90 gear oil/800 mL,
800 cc (0.9 US qt)
JW7
Transaxle Oil
To check transaxle oil level:
1. Place the utility vehicle on a flat,
level surface.
2. Place an oil pan under the
transaxle case.
3. Clean area around servicing
plug å and vent cap ∫.
4. Remove transaxle oil servicing
plug and vent cap located on the
rear of the transaxle case.
A
5. Transaxle oil should be at the
Y-1745
top of the oil servicing hole or
just beginning to run out of hole.
Do not allow foreign material to
enter transaxle. Serious transaxle
damage can result.
6. If needed, add SAE 90 gear oil
until it is at the top of the plug
hole or just beginning to run out
A
of servicing hole.
Y-1746
7. Install the transaxle servicing
plug and tighten to 14-19 Nm,
1.4-1.9 m . kg (124-168 in . lb).
8. Install the vent cap.
TIP
For transaxle oil replacement,
consult a Yamaha dealer or other
qualified mechanic.
MAINTENANCE
NOTICE
1
2
3
4
5
6
7
8
9
10
11
8-11