KING 2016E Owner's Manual page 2

You've purchased a heater from North America's oldest manufacturer of wood burning products.
By heating with wood you're helping to CONSERVE ENERGY!
Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at
least one tree each year. Future generations will thank you.
This manual describes the installation and operation of the United States Stove Company Model 2016EB
woodheater. This heater meets the 2015 U.S. Environmental Protection Agency's crib wood emission limits
for woodheaters sold after May 15, 2015. Under specific EPA test conditions burning Douglas Fir dimensional
lumber this heater has been shown to deliver heat at a rate of 35,750 Btu/hr. This heater achieved a particulate
emissions rate of 3.7 g/hr when tested to method ASTM E2780-10 single Burn Rate Appendix (*and an efficiency
of 66.6%.)
This wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against
federal regulations to alter this setting or otherwise operate this wood heater in a manner inconsistent with
operating instructions in this manual.
The operation of this wood heater in a manner inconsistent with the owner's manual will void you warranty
and is also against federal regulations.
This heater is designed to burn natural wood only. Higher efficiencies and lower emissions generally result
when burning air dried seasoned hardwoods, as compared to softwoods or to green or freshly cut hardwoods.
Burning the following materials may result in release of toxic fumes or render the heater ineffective and cause
smoke.
This wood heater needs periodic inspection and repair for proper operation. It is against federal regulations
to operate this wood heater in a manner inconsistent with operating instructions in this manual.
CONGRATULATIONS!