Hotpoint DSC60S Instructions For Installation And Use Manual page 24

Something Wrong with your
Cooker?
GB
Problem
Oven lamp does
not work
Draught from
beneath control
panel
Condensation on
the wall at the rear
of the cooker.
Steam /
Condensation in
the oven after use.
If you have been through the above list and there is still a problem; Contact Service, see Key Contacts
(back cover).
24
Check
The oven lamp is not covered by the guarantee. The part is easily changed (see the section
on oven lamp replacement). A new lamp may be obtained from our Parts department see
Key Contacts, back page.
A gentle flow of air will be blown from beneath the control panel when the appliance is
used. If the appliance is still warm, this cooling fan may run on, or restart itself when all
controls have been turned off. The fan will stop once the appliance has been cooled. This
is normal and not a fault.
Steam and / or condensation may appear from the vent at the rear of the appliance when
using an oven particularly for foods with a high water content e.g. frozen chips, roast
chicken etc. This is normal, and any excess should be wiped off.
Steam is a by - product of cooking any food with a high water contact. To help minimise
always:
a) Try to avoid leaving food in the oven to cool after being cooked.
b) Use a covered container, wherever possible.