Back to Contents Page
Fan
Dell™ Latitude™ C840 Service Manual
NOTICE:
Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.
1
fan cables
2
M2 x 4-mm screws (3)
Removing the Fan
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
system
board.
3. Remove the three M2 x 4-mm screws from the fan.
4. Disconnect the two fan cables from the system board.
5. Pull the fan away from the back-panel bracket.
NOTICE:
When reconnecting the fan cables, connect the shorter cable to the connector closest to the fan. Route both cables so that they will not be
pinched by the microprocessor thermal-cooling assembly.
Back to Contents Page
Computer."