Miele H6560BP Operating And Installation Instructions page 127

Problem
"Door not locked" will
appear in the display.
"Door not released" will
appear in the display.
"; Fault XX" appears in
the display.
The message "Function
currently not available"
appears in the display
after selecting the
"Descale" function.
The message "Fault with
moisture control - the
automatic programmes
will operate without
moisture" appears in the
display after selecting
an Automatic
programme.
Possible cause and remedy
The Pyrolytic cleaning programme door lock is not
locking.
^ Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Switch the oven off and then back on again.
If the door lock still does not release itself call the Miele
Service Department.
There is a problem that you cannot resolve.
^ Call the Miele Service Department.
The steam injection system is faulty.
^ Call the Miele Service Department.
The steam injection system is faulty.
^ Call the Miele Service Department.
Automatic programmes can be run without using
moisture.
Problem solving guide
127