Ec-Declaration Of Conformity - Husqvarna 324LX-SERIES Operator's Manual

324Lx, 324LDx
Approved accessories
Blade shaft thread M10
Plastic blades
Trimmer head
The following attachments are recommended for the specified models.
Approved accessories
Clean sweep attachment with shaft SR600
Hedge trimmer attachment with shaft HA 110 537 19 66-01
Hedge trimmer attachment with shaft HA 850 537 19 66-02
Edger attachment with shaft
Saw attachment with shaft PA 1100
Saw attachment without shaft PA
Trimmer attachment with shaft TA 850
The following attachments have been developed mainly for the Husqvarna 125LD trimmer, but can also be used with the specified
models.
Approved accessories
Cultivator attachment CAC
Edger attachment EAC
Pole saw attachment PAC
Blower attachment BAC
Hedge trimmer attachment HAC
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the clearing saws Husqvarna 324Lx and
324LDx with serial numbers dating from 2004 onwards (the year is clearly stated on the rating plate, followed by the serial number),
comply with the requirements of the COUNCIL'S DIRECTIVE:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according to Annex V.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:2001, EN ISO 11806.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type examination on
behalf of Husqvarna AB. The certificates are numbered: SEC/04/1013, 01/164/037 - 324Lx / LDx.
Huskvarna 15 March, 2004
Michael Kullberg, Business manager
22 –
English
TECHNICAL DATA
Type
Tricut Ø 255 mm
Tricut Ø 300 mm
Trimmy Fix
Superauto II 1"
S35
T25
T35
Art No.
537 19 67-01
537 19 69-01
537 18 33-16
537 18 33-11
537 35 35-01
Art No.
952 71 19-07
952 71 19-08
952 71 19-10
952 71 19-11
952 71 19-21
Cutting attachment guard, Art. no.
503 93 42-02 / 503 97 71-01
503 93 42-02
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
Use with
324LDx
324LDx
324LDx
324LDx
324LDx
324Lx
324LDx
Use with
324LDx
324LDx
324LDx
324LDx
324LDx