D-Link DSL-2500U User Manual page 27

DSL-2500U ADSL/Ethernet Router
User Manual
On the Static DHCP tab, you can specify MAC address and IP address pairs. The tab is active
when the router's DHCP server is enabled.
To create a MAC-IP pair (set a fixed IP address in the local area network for a device with a certain
MAC address), click the Add button. Then enter the needed IP address and MAC address in the
relevant fields and click the Save button.
Existing MAC-IP pairs are displayed on the Static DHCP tab. To remove a pair, select the
relevant line in the table and click the Remove button. Then click the Save button.
Figure 21. The tab for configuring MAC-IP pairs.
Page 27 of 63
Configuring via Web-based Interface