Aerial Connections - Orion 10DT Instruction Manual

Quick Set-up Sheet for MODEL : 10DT

Aerial Connections

Indoor Aerial
Note:
Main power (ON/OFF) switch is on the rear panel and it is OFF when not in use for a long time.
Power supply system
To use a Household Power Supply
Use the AC line cord provided for operation on AC. Insert the AC cord plug into 240 V 50 Hz AC outlet.
Press MAIN POWER switch on the back panel, the red standby indicator will light. Turn on your unit by pressing
Sub Power ( ) on the front panel or on the remote control, the red standby indicator goes off.
To use DC POWER
1. Connect the supplied car cord to the DC 12 V input jack.
2. Start the car engine and insert the other end of the DC Power cord into a cigarette lighter socket of your car.
Then the STAND BY(
WARNING: Never watch the unit while driving the vehicle.
Connect as follows.
OUTPUT SORTIE
•
RF IN
ON OFF
DIGITAL
AUDIO
COAXIAL
MAIN POWER
ANALOGUE
L(G)
AUDIO
SCART
PRISE PERITEL
R(D)
) indicator will light up.
OUTPUT • SORTIE
RF IN
DIGITAL ON OFF
AUDIO
COAXIAL
MAIN POWER
ANALOGUE L(G)
AUDIO
SCART
PRISE PERITEL
R(D)
Aerial
Main power
(ON/OFF) switch
Mains Lead
CAR
To DC Input Jack
Car Cord
1
To Cigarette
Lighter Socket