Car Telephone - Opel CDR 500 Instruction Manual

You can remove the CD from the unit as
described above, even when the radio is
switched off. lf you do not take the CD out,
it will be returned back into the unit after
approx.5 seconds. The radio unit subse-
quently switches otf again.
Radio Display During CD Play-Back
During CD Play-back, the transmitter fre-
quency or the radio station designation (for
RDS hansmitters) of the VHF station last
heard can be displayed.
Depress the IUMLI (E key for a short time.
The desired information will be displayed
for 5 seconds, e.g. "Ul 101.2".
During these 5 seconds, a different radio
station can be recalled, or a search can be
started using the search keys.
lf the traffic radio (TP) function is active, or
if it is activated during play-back of a CD,
the radio unit will automatically search for
the strongest traffic radio transmitter if the
radio station last heard can no longer be
received.
30
Car Telephone
lf an installed car telephone is connected to
the unit, the radio will go into telephone
mode when a call comes in. The display
will show "MESSAGE". In order to utilize
the telephone mode, the.car telephone
must be connected to the radio by an aut-
horized Opel dealer.
Set Telephone Volume Level
You can preset the volume level for the
telephone and independently from the nor-
mal volume for the radio unit.
. Turn radio off.
. Keep [TP] @ key dePressed and turn
the radio on again.
The confirmation signal will be given. The
preset volume level will appear on the dis-
play, e.g. "MS-VOL + 1".
. Select the desired setting between -3 and
+3 using the search keys (D and @.
. Again keep the [TP] key depressed until
the contirmation signal is given.
The setting will be stored.
lf the [TP] key is not depressed within
10 seconds, the unit will revert to its original
setting without storing any changes.
The volume level can be adjusted during an
incoming call by using the knob O.
Interchanging of Incoming Calls
and Trafflc Announcements
When the tratfic radio is activated (symbol
"[TP]" on the display) and a telephone call
is received during a traffic announcement,
the incoming call will be given precedence.
By use of the button tTPl @, you are able
to interchange in such cases between the
running traffic announcement
and the tele-
phone call.