Add New Event Window (Devices With One Input Event) - OnSSI NetDVR 6.5a User Manual

On-Net Surveillance Systems, Inc.
Edit selected...
Remove
selected
Advanced...

Add New Event Window (Devices With One Input Event)

The window (for devices capable of handling one input event only) lets you specify the settings for an
Add New Event
input event on devices capable of handling one input event only.
The Add New Event window (for devices capable of handling one input event only)
Access: You access the Add New Event window (for devices capable of handling one input event only) by
selecting the required device and clicking the Add new event... button in the
applies when the selected device is capable of handling a single input event only. Some devices are capable of
handling several input events, in which case a different window, the
Add new event... button is clicked.
Note: Before you specify input events for a device, verify that sensor operation is recognized by the device. Most
devices are capable of showing this in their configuration interfaces, or via CGI script commands. Also check the
NetDVR release note to verify that input-controlled operations are supported for the device and firmware used.
•
Multi-camera devices: Clicking the Add VMD Event (Motion
Detection) button will open a simple dialog in which you select the
required camera. This way you are able to define a VMD event for
each camera on a multi-camera device.
Lets you edit the settings for an item selected in the Defined events list. For
devices capable of handling a single input event only, the button will open the
Edit Event window (for editing input
For devices capable of handling several input events, the button will open the
Multiple Input Events window. If the selected item is a timer event, the button
will open the New Timer window.
If the selected item is an output, the button will open the
Lets you remove an event selected in the Defined events list.
Note: The selected event will be removed without further warning.
Opens the Advanced window, in which you are able to specify network
settings to be used in connection with event handling: which ports to use for
FTP, alerts and SMTP input/output events as well as which polling frequency
to use on devices requiring polling.
events).
Edit Output
I/O Setup window. Note that this only
Multiple Input Events window, will open when the
NetDVR 6.5
Administration
window.
89