Cea Specifications - Orion CobaltTM G42110 Owner's Manual

8 . Rear Hi-Pass Crossover Frequency Control - adjusts the frequency of the rear chan-
nels Hi-Pass crossover .
Rear Lo-Pass Crossover Frequency Control - adjusts the frequency of the rear
9 .
channels Lo-Pass crossover .
0 . Rear LPF, FULL, HPF Switch - selects either Lo-pass crossover, Full range or Hi-Pass
crossover for rear channels .
 . Rear Gain Control - continuously adjusts from 250mV to 5V for full rear channel
output power .
2 . RCA Rear Inputs - accepts rCA input from the rear channels of a source unit .
3 . Status LED - Will indicate any fault condition in amplifier, also lights briefly during
muting phase of turn-on .
4 . Front Hi-Pass Crossover Frequency Control - adjusts the frequency of the front
channels Hi-Pass crossover .
5 . Rear Variable Bass Control - Adjust bass gain on rear channels from 0dB to +8dB .
Figure 2
Figura 2
Abbildung 2
Output Plate
 . Speaker Connections - accepts up to 2 AWG speaker wire .
2 . 2 ATC Fuses - protects the amplifier from over current situations .
Power Connections - accepts up to 4 AWG power cables .
3 .
REM Remote Turn-on Input - turns on the amplifier when fed 2 V+ .
4 .
Ground Connection - accepts up to 4 AWG ground cable .
4 .

CEA SPECIFICATIONS

CO600 .4
4
1
1
1
Power Output: 60 Watts rMS x 4 at 4 ohms and < % THD+N
Signal to Noise ratio: -70 dBA (reference  Watt into 4 ohms)
Addition Power: 75 Watts rMS x 4 at 2 ohms and < % THD+N
1
2 2 3
2 2 3
2 2 3
© 2007 directed electronics—all rights reserved
2 3
4 5
4 5
4 5
4 5