Cleaning The Air Filter Element - Yamaha GRIZZLY 350 YFM35GA Owner's Manual

1 2
3
4
1. Final gear oil filler bolt
2. Gasket
3. Final gear oil
4. Correct oil level
8
Recommended final gear oil:
See page 10-1.
7. Check the oil filler bolt gasket for damage, and
replace it if necessary.
8. Install the oil filler bolt and its gasket, and then
tighten the bolt to the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
9. Check the final gear case for oil leakage. If oil
is leaking, check for the cause.
10. Install the final gear case guard by installing
the bolts and tightening them to the specified
torque.
Tightening torque:
Final gear case guard bolt:
16 Nm (1.6 m·kgf, 12 ft·lbf)
EBU23646

Cleaning the air filter element

The air filter element should be cleaned at the in-
tervals specified in the periodic maintenance and
lubrication chart. Clean or, if necessary, replace
the air filter element more frequently if you are
riding in unusually wet or dusty areas.
TIP
There is a check hose at the bottom of the air filter
case. If dust or water collects in this hose, empty
the hose and clean the air filter element and air fil-
ter case.
8-18