EBU18611
Drive select lever
The drive select lever is used to shift your ATV into
the low-range, high-range, neutral, reverse and
park positions. See the "Operating the drive select
lever and driving in reverse" section on page 6-3
for the drive select lever operation.
1. Drive select lever
EBU18690
Recoil starter
Firmly grasp the handle and pull slightly until en-
gagement can be felt. Then pull forcefully, being
careful not to pull the rope all the way out.
1. Recoil starter
EWB00330
WARNING
Always shift the drive select lever to park posi-
tion before starting the engine, otherwise the
ATV could start to move unexpectedly, which
could cause an accident.
EBU18720
Fuel tank cap
Remove the fuel tank cap by turning it counter-
clockwise.
4-14
4