Adjusting The Rear Shock Absorber Assembly (Yfm25Ra/Yfm250Ra) - Yamaha YFM25RA Owner's Manual

(b)
1. Compression damping force adjusting screw (for slow
compression damping)
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
16 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in di-
rection (a)
(a)
1
4-18
EWB00410
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and un-
derstand the following information before han-
dling the shock absorber assemblies.
G Do not tamper with or attempt to open the
cylinder assemblies.
G
Do not subject the shock absorber assem-
blies to an open flame or other high heat
source. This may cause the unit to explode
due to excessive gas pressure.
G
Do not deform or damage the cylinders in
any way. Cylinder damage will result in poor
damping performance.
G Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take the
shock absorber assembly to a Yamaha deal-
er for any service.
EBU28243
Adjusting the rear shock absorber as-
sembly (YFM25RA/YFM250RA)
The spring preload can be adjusted to suit the rid-
er's weight and the riding conditions.
4